Maintenance ·····················································19 Specifications ···················································20 How to use [eHELP] (p. 17) Thank you for purchasing this Panasonic product. Please read these instructions carefully before operating this product and retain them for future reference. TQB4GC1009-2 The images shown in this manual are for illustrative purposes only.
Panasonic has no authority to and does not grant you that permission and explicitly disclaims any right, ability or intention to obtain such permission on your This TV is designed to operate on AC 220-240 V, 50 / behalf.
LAN devices, other Bluetooth devices, microwaves, with this TV. mobile phones and the devices that use 2.4 GHz signal. Do not use the pedestal if it becomes warped or physically damaged. If this occurs, contact your nearest Panasonic dealer immediately.
Page 4
3D Eyewear Use Ventilation Caution Caution Use the 3D Eyewear only for the intended purpose and Allow sufficient space around the TV in order to help nothing else. prevent excessive heat, which could lead to early failure Do not move around while wearing the 3D Eyewear to of some electronic components.
Accessories Remote Control VIERA Touch Pad Mains lead Batteries (4) Controller (p. 8) (p. 13) (p. 13, 14) (p. 14) N2QAYB000858 N2QBYB000027 Pedestal 3D Eyewear (4) (see below, p. 7) (p. 18) DT60 series DT60 series WT60 series 50-inch model 60-inch model 55-inch model Cable tie...
Page 6
Assembling the pedestal 50-inch model 55-inch model 60-inch model Preventing the TV from falling over It is recommended to secure the pedestal to a furniture as shown to prevent the TV from falling over. This information is designed to reduce the risk of injuries caused by the TV falling over. However, no measure can guarantee protection in all cases.
Page 7
Assembling / Removing the pedestal WT60 series Assembly screw (4) Bracket Cover M5 × 10 Assembly screw (7) Base Spiral tube (p. 12) M4 × 10 Parts for preventing the TV from falling over Band (2) Screw (2) Wood screw (2) Assembling the pedestal Preventing the TV from falling over It is recommended to secure the pedestal to a furniture as shown...
Connections External equipment and cables shown are not supplied with this TV. Ensure that the unit is disconnected from the mains socket before attaching or disconnecting any leads. Check the type of terminals and cable plugs are correct when connecting. Always use a fully wired HDMI cable.
AV devices DVD Recorder / VCR Aerial DVD Recorder / VCR HDMI cable RF cable RF cable Set top box HDMI cable Set top box Network To enable the network service functions (VIERA Connect, etc.), you need to connect the TV to a broadband network environment.
Page 10
Other connections DVD player (COMPONENT equipment) (Listening) DVD Player (Viewing) Camcorder / Game equipment (VIDEO equipment) (Listening) Camcorder (Viewing) Game equipment Amplifier (to listen with speakers) HDMI cable Amplifier with External equipment speaker system (DVD Player, etc.) Use HDMI2 for connecting an amplifier. This connection is applicable when using an amplifier that has ARC (Audio Return Channel) function.
Page 11
Types of connectable equipment to each terminal Terminal COMPONENT VIDEO Features To play back videocassettes / DVDs (VCR / DVD Player) To watch 3D contents (Blu-ray Disc Player) To watch satellite broadcasts (Set top box) To watch camcorder images (Video camera) To play games (Game equipment) To use amplifier with speaker system To use network services...
Using the cable tie and spiral tube (supplied) WT60 series Do not bundle the RF cable and mains lead together (could cause distorted image). Fix cables with the cable tie and spiral tube as necessary. When using the optional accessory, follow the option’s assembly manual to fix cables. Attach the cable tie Bundle the cables hole...
Page 13
Remote Control Confirms selections and choices. Press after selecting channel positions to quickly change channel. Displays the Channel List. [Option Menu] Easy optional setting for viewing, sound, etc. Coloured buttons (red-green-yellow-blue) Used for the selection, navigation and operation of various functions. Sound Mute On / Off Teletext button This button is not used for this model.
Page 14
VIERA Touch Pad Controller This touch pad controller is designed for the convenient operations, especially, on Home Screen or internet contents. You can operate the TV intuitively with this controller. The touch pad controller can be used by registering to this TV with Bluetooth wireless technology. Setup screen to register will appear in “First time Auto Tuning”...
Indicator / Control panel When pressing 1, 2, 3 buttons, the control panel guide appears on the right side of the screen for 3 seconds to highlight the pressed button. 20 mm 9 10 * The positons of 1 - 7 (buttons / sensors / indicator) for WT60 series and DT60 series are the same.
Select the following items Set up each item by following the on-screen instructions. Select [Home] Select [Home] viewing environment to use in your home environment. [Shop] is for shop display. To change viewing environment later on, you will need to initialise all settings by accessing Shipping Condition. Set up the network connection Select your area Australia...
Watching TV Select the TV viewer from [Home Screen] select access Select Digital TV or Analogue TV Select a channel To select 2 or more-digit channel position number, e.g. 399 down To access each feature Access [APPS List] and select a feature Example: [APPS List] APPS is the applications (features) of the TV.
If the input mode is not switched automatically, select the input mode connected to the player using the AV button. 3D-supported broadcast Please consult the suppliers of contents or programmes for availability of this service. 3D photos and 3D videos taken by 3D-compatible Panasonic products Available in Media Player and Network services. 2D images converted to 3D Press the 3D button and set to [2D 3D] mode in [3D Mode Selection].
FAQs Before requesting service or assistance, please follow these simple guides to solve the problem. For more information, refer to [eHELP] (Support > FAQs). The TV does not switch on Check the mains lead is plugged into the TV and the socket outlet. The TV goes into Standby mode Auto power standby function is activated.
Specifications 50-inch model 55-inch model 60-inch model DT60 series TH-L50DT60A TH-L55DT60A Model No. TH-L60DT60A TH-L50DT60Z TH-L55DT60Z AC 220-240 V, 50 / 60 Hz AC 220-240 V, 50 / 60 Hz AC 220-240 V, 50 / 60 Hz Rating 0.64 A 0.70 A 1.02 A Normal (Home)
Page 21
Australia New Zealand TH-L50DT60A TH-L47WT60A TH-L50DT60Z TH-L47WT60Z Model No. TH-L55DT60A TH-L55WT60A TH-L55DT60Z TH-L55WT60Z TH-L60DT60A 7 MHz VHF / UHF (Australia) 8 MHz UHF (New Zealand) Digital TV free-to-air TV broadcast reception free-to-air TV broadcast reception PAL B / G Reception of Off air broadcasts PAL 60 Hz Playback of NTSC tape from some PAL Video recorders (VCR) M.NTSC...
Page 22
0 °C - 40 °C Materials Main body / Lens section: Resin Use Panasonic 3D Eyewear supporting passive 3D system technology. Note VIERA Touch Pad Controller uses Bluetooth wireless technology. Design and Specifications are subject to change without notice. Mass and Dimensions shown are approximate.
Page 23
If there is a major failure in regard to the product which cannot be remedied then you must notify us within a reasonable period by contacting the Panasonic Customer Care Centre. If the failure in the product is not a major failure then Panasonic may choose to repair or replace the product and will do so in a reasonable period of time from receiving notice from you.
Page 24
New Zealand WARRANTY - New Zealand only NEW ZEALAND Distributed in New Zealand by Panasonic New Zealand Limited 350 Te Irirangi Drive East Tamaki, Private Bag 14911, Panmure Auckland Tel. 09 272 0100 Customer Care Center Email: Customerservice@nz.panasonic.com www.panasonic.co.nz Warranty Information on Disposal in other Countries outside the European Union This symbol is only valid in the European Union.