Supplied Components - Sharp PN-T321 Setup Manual

Sharp pn-t321: specifications
Hide thumbs Also See for PN-T321:
Table of Contents

Advertisement

If any component should be missing, please contact your dealer.
 Liquid Crystal Display Monitor: 1
 Remote control unit: 1
(Battery preinstalled)
 Cable clamp: 1
 Power cord
 Conversion cable (for AV component): 1
(green/blue/red)
* Sharp Corporation holds authorship rights to the Utility Disk program. Do not reproduce it without permission.
* For environmental protection!
Do not dispose of batteries in household waste. Follow the disposal instructions for your area.
Caution
• Be sure to turn off the main power switch and disconnect the plug from the power outlet before connecting/disconnecting
cables. Also, read the manual of the equipment to be connected.
• Be careful not to confuse the input terminal with the output terminal when connecting cables. Accidentally reversing cables
connected to the input and output terminals may cause malfunctions and the other problems.
AC input
terminal
Power cord
(Supplied)
For power outlet
TIPS
• Connect the audio used in each input mode to the audio input terminals below.
Input mode
D-SUB, DVI-D
COMPONENT, VIDEO
HDMI
USB
* If audio will not be input by HDMI cable.
• Insert the power code through the claw at the bottom of the monitor (left side of the monitor if oriented vertically).
For the monitor in horizontal orientation
• HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.

Supplied Components

 Conversion cable (for AV video): 1
(red/white/yellow)
 CD-ROM (Utility Disk for Windows): 1
 Setup Manual (this manual): 1
 Vertical sticker (Operation panel): 1
 Vertical sticker (Logo): 1
Connections
Audio input terminal
PC audio input terminal
AV audio input terminal
PC/AV HDMI input terminal, PC audio input terminal *
* Connect with the provided conversion cable.
-
For the monitor in vertical orientation
 USB flash drive cover: 1
 USB flash drive cover screw: 1
 Cover Sharp logo: 1
Place this sticker onto the SHARP
logo to cover the logo.
USB port
RS-232C input terminal
Audio output terminal
AV video/AV audio input terminal *
AV COMPONENT input terminal *
PC audio input terminal
PC D-sub input terminal
PC/AV DVI-D input terminal
PC/AV HDMI input terminal

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents