Setting Display Mode; Checking Product Information - Sharp LL-173C Operation Manual

Setting display mode

Color tone or brightness can be changed with one
command.
STD
Displays image with the color tone results from
original scheme of liquid crystal panel.
OFFICE
Display brightness is lowered.
(This mode saves power.)
sRGB
sRGB is international standard of color
representation specified by IEC (International
Electrotechnical Commission).
Color conversion is made in taking account of
liquid crystal's characteristics and represents
color tone close to its original image.
VIVID
Displays an image with dynamic and vivid
primary colors.
- If [DISPLAY MODE] is set to [sRGB] or [VIVID],
[WHITE BALANCE] is set to [STD], and [GAMMA]
is set to [0].
How to set
Press the / MODE button when the OSD (On
Screen Display) Menu is not displayed.
Each time the button is pressed, the next menu
item appears.
(STD → OFFICE → sRGB → VIVID → STD)
On Screen Display for adjustment disappears
several seconds after the last operation.
Adjusting the screen display
16

Checking product information

A model name [MODEL], a serial no. [S/N], and
usage time [USAGE TIME] of the monitor can be
checked.
1. Turn the power off.
2. While pressing the
monitor's power button (i.e. turn the power on).
The product information will appear.
When the screen appears, release the buttons.
3. Press the MENU button.
The product information will disappear.
Note:
- Please note that the indication of usage time at
purchase may not be 0 (zero), as a result of
factory inspection and other activities during
manufacture.
/ MODE button, press the