Product Description - Sharp LL-173C Operation Manual

1 2 3
1. AUTO button ............................ This button is used to perform automatic adjustment of the screen
2. MENU button ........................... This button is used to pop-up, select, and close the On Screen
3. / MODE button ..................... When the OSD Menu is displayed:
4. buttons ............................. When the OSD Menu is displayed:
5. Power button ............................ Pressing this button turns the power on.
6. Power LED ............................... This LED is lit green when in use and orange when in power-saving
7. Power terminal
8. Analog RGB input terminal ..... The analog signal cable is connected here. The analog signal cable
9. Ventilation openings ................ Never block the ventilation openings as this may lead to overheating
10. Security lock anchor ................ By connecting a security lock (commercially available) to the security
11. Cable clamp ............................ You can use this to secure the cables connected to the terminals.

Product description

6
4 5
(CLOCK, PHASE, H-POS, and V-POS). (p.17)
Display (OSD) Menu.
This button is used to select menu options.
When the OSD Menu is not displayed:
This button is used to set DISPLAY MODE.
These buttons are used to select an option or adjust the value of the
selected option.
When the OSD Menu is not displayed:
These buttons are used to adjust backlight brightness.
Press the button again to turn the power off.
mode.
included should be used.
inside the monitor and result in malfunction.
lock anchor, the monitor is fixed so that it cannot be transported.
The security slot works in conjunction with Kensington Micro Saver
Security Systems.
7 8
11
9
10
11