Table of Contents
Advertisement
Clock function
END
TIME DELAY
MINUTE MINDER
00:00
COUNT UP TIMER
SETTING AND CHANGING THE TIME
After the first connection to the mains, wait until the
display shows
and "12:00". "12" flashes.
1. Press
or
to set the hours.
2. Press
to confirm and switch to set the
minutes.
The display shows
flashes.
3. Press
or
to set the current minutes.
4. Press
to confirm or the set time of day will
be saved automatically after 5 seconds.
The display shows the new time.
To change the time of day press
again until the indicator for the time of day
flashes in the display.
SETTING THE DURATION
1. Set an oven function.
2. Press
again and again until
flash.
3. Press
or
to set the minutes and then the
hours for DURATION time. Press
confirm.
When the time ends an acoustic signal sounds for
2 minutes.
and time setting flash in the display.
The appliance deactivates automatically.
4. Press any button or open the oven door to stop
the acoustic signal.
5. Turn the knob for the oven functions to the off
position.
To set when the appliance deactivates. Use only when an
oven function is set.
Combination of DURATION and END function.
Use to set a countdown time. This function has no effect on
the operation of the appliance. You can set the MINUTE
MINDER at any time, also if the appliance is off.
If you do not set any other clock function the COUNT UP TIM-
ER automatically monitor how long the appliance operates.
It is on immediately when the oven starts to heat.
The Count Up Timer cannot be used with the functions: DU-
RATION, END.
and the set hour. "00"
again and
starts to
to
Application
SETTING THE END
1. Set an oven function.
2. Press
again and again until
flash.
3. Press
or
to set the hours and then the
minutes for END time. Press
At the set time an acoustic signal sounds for 2
minutes.
and time setting flash in the display.
The appliance deactivates automatically.
4. Press any button or open the oven door to stop
the acoustic signal.
5. Turn the knob for the oven functions to the off
position.
SETTING THE TIME DELAY FUNCTION
1. Set an oven function.
2. Press
again and again until
flash.
3. Press
or
to set the minutes and then the
hours for DURATION time. Press
confirm.
The display shows flashing
4. Press
or
to set the hours and then the
minutes for END time. Press
Appliance turns on automatically later on, works for
the set DURATION time and stops at the set END
time. At the set time an acoustic signal sounds for
2 minutes.
and time setting flash in the display.
The appliance deactivates.
5. Press any button or open the oven door to stop
the acoustic signal.
starts to
to confirm.
starts to
to
.
to confirm.
9
Advertisement
Table of Contents
