Set Channel Quality And Assign Inputs To Channels - Bosch Integrus Installation And Operation Manual

Integrus
Menu Item
7.2.5

Set channel quality and assign inputs to channels

The audio quality of the channels (mono/stereo, standard/premium) can be set in sub-menu
4D. The quality can be set the same for all channels or for each channel separately. Note that
choosing stereo and/or premium quality uses more bandwidth and decreases the number of
available channels (see section 4.1.4 ). In stereo mode, the left signal is always an even
numbered input. The next higher input number is used for the right signal.
When the quality is set the same for all channels with the 'All Mono' or 'All Stereo' options, the
inputs are assigned automatically to the channels as indicated in the table below:
All Mono
Channel
00
01
...
31
With menu option 4D (Per Channel Settings), the assignment can also be done for each
channel separately.
Menu Item
4D Ch. Quality
If, in the network mode, stereo quality is selected, the floor language is assigned to the left
channel and the translation is assigned to the right channel. This can be used for language
learning applications.
Bosch Security Systems B.V.
Options
* - Automatic: nn
- Manual: nn
All Stereo
Input Channel
00 00
01 01
... ...
31 15
Options
Quality:
* All Mono SQ
All Mono PQ
All Stereo SQ
All Stereo PQ
Per Channel . . .
Installation and Operation manual
Description
The number of used channels is set
automatically to the maximum possible
number of channels (depending on
transmitter type and the selected quality
modes). When a DCN Next Generation or a
DCN system is connected to the transmitter,
the number of channels is determined by the
settings of the connected system.
Set the number of used channels (the
maximum number depends on the transmitter
type and the selected quality modes). An
asterisk (*) is shown when the selected
number is not possible because it is higher
than the maximum number of channels.
input L
00
02
...
30
Description
Set all channels to mono, standard quality.
Set all channels to mono, premium quality.
Set all channels to stereo, standard quality
Set all channels to stereo, premium quality.
Select this option to go to the 'Per Channel
Settings' menu.
Configuration | en 53
Input R
01
03
...
31
IOM-INT | V1.1 | 2010.12