Initial Setting : System Menu Setting; Ajuste Inicial: Ajuste Del Menú System (Sistema); Setting The Clock (Clock Set); Ajuste Del Reloj <Clock Set> (Ajuste Reloj) - Samsung SC-D263 Owner's Instruction Book

Samsung sc-d263: user guide
Hide thumbs Also See for SC-D263:
Table of Contents

Advertisement

ENGLISH
Initial Setting : System Menu Setting Ajuste inicial: ajuste del menú System (Sistema)

Setting the Clock (Clock Set)

✤ Clock setup works in <Camera>/<Player>/<M.Cam>/<M.Player>
modes. ➥page 19
✤ The Date/Time is automatically recorded onto a tape. Before
recording, please set the <Date/Time>. ➥page 30
1. Set the [Power] switch to [CAMERA] or
[PLAYER].
2. Set the [Mode] switch to [TAPE] or [MEMORY].
(SC-D363/D364/D365/D366 only)
3. Press the [MENU] button.
The menu list will appear.
4. Move the [Zoom] lever up or down to select
<System>, then press the [OK] button.
5. Move the [Zoom] lever up or down to select
<Clock Set>, then press the [OK] button.
The year will be highlighted first.
6. Move the [Zoom] lever up or down to set current
<Year>, then press the [OK] button.
The month will be highlighted.
7. You can set the month, day, hour and minute
following the same procedure after setting the year.
8. Press the [OK] button after setting the minutes.
A message <Complete !> is displayed.
To adjust the clock, select the Year, Month, Day,
Hour or Min by pressing the [OK] button, then
move the [Zoom] lever up or down to set
respective values.
9. To exit, press the [MENU] button.
[ Notes ]
After the Lithium Battery loses its charge (after
about 6 months), the date/time appears on the
screen as <12:00 AM JAN.1,2006>.
You can set the year up to 2037.
If the Lithium Battery is not installed, any inputted data will not be
backed up.
Ajuste del reloj <Clock Set> (Ajuste Reloj)
✤ La configuración del reloj está operativa en los modos <Camera>
/<Player>/<M.Cam>/<M.Player>. ➥pág. 19
✤ La fecha y la hora se graban de manera automática en la cinta.
Antes de grabar, fije la <Date/Time>. ➥pág. 30
4
Camera Mode
√System
Clock Set
√On
Remote
√On
Beep Sound
√English
Language
√On
Demonstration
ZOOM
Move
OK
Select
MENU
5
Camera Mode
Back
Clock Set
JAN 1 2006
Remote
Beep Sound
12 : 00 AM
Language
Demonstration
ZOOM
Adjust
OK
Select
MENU
8
Camera Mode
Back
Clock Set
JAN 1 2006
Remote
Beep Sound
12 : 00 AM
Language
Complete !
Demonstration
ZOOM
Move
OK
Select
MENU
Si no se instala la batería de litio, no se memorizará ningún
dato introducido.
1. Coloque el interruptor [Power] en [CAMERA] o
[PLAYER].
2. Coloque el interruptor [Mode] en [TAPE] o
[MEMORY]. (Sólo SC-D363/D364/D365/D366)
3. Presione el botón [MENU].
Aparecerá la lista de menús.
4. Mueva la palanca [Zoom] arriba o abajo para
seleccionar <System> y presione el botón [OK].
Exit
5. Mueva la palanca [Zoom] arriba o abajo para
seleccionar <Clock Set> y presione el botón [OK].
Primero aparecerá resaltado el año.
6. Mueva la palanca [Zoom] arriba o abajo para ajustar
el <Year> actual y presione el botón [OK].
...
Se resaltará el mes.
7. Fije el mes, día, hora y minutos siguiendo el mismo
procedimiento tras ajustar el año.
8. Presione el botón [OK] tras ajustar los minutos.
Aparece el mensaje <Complete!>.
Exit
Para ajustar el reloj, seleccione el año, mes, día,
hora o minuto presionando el botón [OK] y
mueva la palanca [Zoom] arriba o abajo para
ajustar los valores respectivos.
9. Para salir, presione el botón [MENU].
[ Notas ]
Una vez que la batería de litio pierda su carga
(después de 6 meses aproximadamente), la fecha
y hora aparecen en pantalla como
Exit
<12:00 AM JAN.1, 2006>.
Puede definir el año hasta 2037.
ESPAÑOL
23
23

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents