Page 1 Digital Video Camcorder VP-D200(i)/D230(i)/D250(i)/D270(i) Auto Focus Charge Coupled Device Liquid Crystal Display Owner’s Instruction Book Before operating the unit, please read this instruction book thoroughly, and retain it for future reference. This product meets the intent of Directive 89/336 CEE, 73/23 CEE, 93/68 CEE.
Page 2: Table Of Contents
Connecting a Power Source ... 23 To use the AC Power adapter and DC Cable ... 23 To select the CAMCORDER mode (VP-D230(i)/D250(i)/D270(i) only) ...23 Using the Lithium Ion Battery Pack ... 24 Charging the Lithium Ion Battery Pack ... 24 Table of continuous recording time based on model and battery type ...
Page 3 Use of various Functions ... 35 Setting menu items ... 35 Set the camcorder to CAM or PLAYER mode and M.REC or M.PLAY mode (VP-D230(i)/D250(i)/D270(i) only) ... 36 Availability of functions in each mode ... 37 CLOCK SET ... 38 WL.
Page 4 ENGLISH Contents NIGHT CAPTURE (0 lux recording) ... 67 POWER NIGHT CAPTURE... 68 Various Recording Techniques ... 69 Playback ... 70 Tape Playback ... 70 Playback on the LCD ... 70 Playback on a TV monitor ... 70 Connecting to a TV which has Audio/Video input jacks ... 70 Connecting to a TV which has no Audio and Video input jacks ...
Page 5 Contents Image Format ... 85 Selecting the CAMCORDER mode ... 85 MEMORY FILE NUMBER ... 86 Selecting the image quality ... 87 Select the image quality ... 87 Number of images on the Memory Stick ... 87 Recording Still images to a Memory Stick in M.REC Mode ... 88 Recording images to a Memory Stick ...
Page 6: Notes And Safety Instructions
Notes regarding the rotation of the LCD screen Please rotate the LCD screen carefully as illustrated. Over rotation may cause damage to the inside of the hinge that connects the LCD screen to the Camcorder. 1. LCD screen closed. 2. Standard recording using the LCD screen.
Page 7 - When you move the camcorder from a cold location to a warm location (e.g. from outside to inside during winter.) - When you move the camcorder from a cool location to a hot location (e.g. from inside to outside during the summer.) 2.
Page 8 - To preserve battery power, keep your camcorder turned off when you are not operating it. - If your camcorder is in CAM mode, and it is left in STBY mode without being operated for more than 5 minutes with a tape installed, it will automatically turn itself off to protect against unnecessary battery discharge.
Page 9 Notes regarding electronic viewfinder 1. Do not position the camcorder such that the viewfinder is pointing towards the sun. Direct sunlight can damage the inside of the viewfinder. Be careful when placing the camcorder under sunlight or near a window exposed to sunlight.
Page 10 1. The lithium battery maintains the clock function and user settings; even if the battery pack or AC adapter is removed. 2. The lithium battery for the camcorder lasts about 6 months under normal operation from time of installation. 3. When the lithium battery becomes weak or dead, the date/time indicator will display “---” when you set the DATE/TIME to ON.
Page 11: Getting To Know Your Camcorder
Getting to Know Your Camcorder Features • Digital data transfer function with IEEE1394 By incorporating the IEEE 1394 (i.LINK™ : i.LINK is a serial data transfer protocol and interconnectivity system, used to transmit DV data) high speed data transport port, both moving and still images can be transferred to a PC, making it possible to produce or edit various images.
Page 12: Accessories Supplied With Camcorder
ENGLISH Getting to Know Your Camcorder Accessories Supplied with camcorder Make sure that the following basic accessories are supplied with your digital video camera. Basic Accessories 1. Lithium Ion Battery pack 2. AC Power Adapter 3. AC Cord 4. AUDIO/VIDEO Cable 5.
Page 13: Front & Left View
Getting to Know Your Camcorder Front & Left View 1. Lens 2. Infrared Light 3. Remote Sensor 4. S-VIDEO Jack 1. Lens 2. Infrared Light (see page 67) 3. Remote Sensor 4. S-VIDEO Jack 5. View Finder 6. Internal MIC 7.
Page 14: Left Side View
ENGLISH Getting to Know Your Camcorder Left Side View 1. Function buttons FADE S.SHOW TAPE EJECT FW D SE AR CH 1. Function buttons PLAYER CAMERA : (PLAY/STILL) FADE (see page 63) : (STOP) BLC (see page 62) : (FF)
Page 15: Right & Top View
Getting to Know Your Camcorder Right & Top View 1. Accessory Shoe 2. Speaker 3. FOCUS Adjustment knob 4. Slow Shutter Button 5. PHOTO Button 1. Accessory Shoe 2. Speaker 3. FOCUS Adjustment knob (see page 32) 4. Slow Shutter Button (see page 59) 5.
Page 16: Rear & Bottom View
ENGLISH Getting to Know Your Camcorder Rear & Bottom View 1. MENU Button 2. MENU Selector (VOL/MF) 3. Charging indicator 4. TAPE EJECT 1. MENU Button 2. MENU Selector (VOL/MF) 3. Charging indicator 4. TAPE EJECT 5. START/STOP button 5. START/STOP button 6.
Page 17: Remote Control (Vp-D230(I)/D250(I)/D270(I) Only)
Getting to Know Your Camcorder Remote control (VP-D230(i)/D250(i)/D270(i) only) 1. PHOTO 2. START/STOP 3. SELF TIMER 4. ZERO MEMORY 5. PHOTO SEARCH 6. A.DUB (FF) (REW) (PLAY) 10. Direction 1. PHOTO 2. START/STOP 3. SELF TIMER (see page 20) 4. ZERO MEMORY (see page 74) 5.
Page 18: Osd (On Screen Display In Cam And Player Modes)
ENGLISH Getting to Know Your Camcorder OSD (On Screen Display in CAM and PLAYER modes) 1. Battery level (see page 26) 2. Easy mode (see pages 60) 3. DSE (Digital Special Effects) mode (see page 49) 4. Program AE (see page 43) 5.
Page 19: Osd (On Screen Display In M.rec And M.play Modes) (Vp-D230(I)/D250(I)/D270(I) Only)
Getting to Know Your Camcorder OSD (On Screen Display in M.REC/M.PLAY modes) (VP-D230(i)/D250(i)/D270(i) only) A. Folder number-file number (see page 85) B. Image counter - Current still image/Total number of recordable still images. C. CARD (MEMORY STICK) indicator D. Image recording and loading indicator E.
Page 20: Preparation
When you use the Self Timer function on the remote control, the recording begins automatically in 10 seconds. 1. Set the camcorder to CAM mode. 2. Press the SELF TIMER button until the appropriate indicator is displayed in the LCD.
Page 21: Lithium Battery Installation
The lithium battery for the camcorder lasts about 6 months under normal operation from the time of installation. When the lithium battery becomes weak or dead, the date/time indicator will display “---” when you set the DATE/TIME to When this occurs, replace with the lithium battery of CR2025 type.
Page 22: Adjusting The Hand Strap
It is very important to ensure that the Hand strap has been correctly adjusted before you begin your recording. The hand strap enables you to : - Hold the camcorder in a stable, comfortable position. - Press the Zoom and START/STOP button without having to change the position of your hand.
Page 23: Connecting A Power Source
To select the CAMCORDER mode If you want to use this unit as a camcorder, set the mode switch to TAPE position. If you want to use this unit as a DSC (Digital Still Camera), set the mode switch to MEMORY STICK position.
Page 24: Using The Lithium Ion Battery Pack
5. When the battery is fully charged, disconnect the battery pack and the AC Power adapter from the camcorder. Even with the power switched off, the battery pack will still discharge if it is left connected to the camcorder. Notes The battery pack may be charged a little at the time of purchase.
Page 25: Table Of Continuous Recording Time Based On Model And Battery Type
Preparation Using the Lithium Ion Battery Pack Table of continuous recording time based on model and battery type. If you close the LCD screen, it switches off and the viewfinder switches on automatically. The continuous recording times given in the table above are approximations. Actual recording time depends on usage.
Page 26: Battery Level Display
77°F(25°C). As the environmental temperature and conditions may differ when you actually use the camcorder, the remaining battery time may not be the same as the approximate continuous recording times given in these instructions.
Page 27: Inserting And Ejecting A Cassette
Preparation Inserting and Ejecting a Cassette When inserting a tape or closing a cassette holder, do not apply excessive force. This may cause a malfunction. Do not use any tapes other than Mini DV cassettes. 1. Connect a power source and slide the TAPE EJECT switch and open the cassette door.
Page 28: Basic Recording
ENGLISH Basic Recording Making your First Recording 1. Connect a Power source to the camcorder. (see page 23) (A battery pack or a AC power adapter) Insert a cassette. (see page 27) 2. Remove the LENS CAP. 3. Set the power switch to the CAM position.
Page 29: Record Search (Rec Search)
Basic Recording When a cassette is loaded and the camcorder is left in the STBY mode for more than 5 minutes without being used, it will switch off automatically. To use it again, push the START/STOP button or set the Power switch to OFF and then back to CAM.
Page 30: Hints For Stable Image Recording
ENGLISH Basic Recording Hints for Stable Image Recording While recording, it is very important to hold the camcorder correctly. Fix the LENS cap firmly by clipping it to the hand strap. (refer to the figure) Recording with the LCD monitor 1.
Page 31: Adjusting The Lcd
Basic Recording Adjusting the LCD Your camcorder is equipped with a 2.5 inch colour Liquid Crystal Display(LCD) screen, which enables you to view what you are recording or playing back directly. Depending on the conditions under which you are using the camcorder (indoors or outdoors for example), you can adjust ;...
Page 32: Using The Viewfinder
ENGLISH Basic Recording 8. Push the MENU SELECTOR button again. You may select NORMAL, SUPER or BACK LIGHT MENU SELECTOR to save the setting. - When you use the LCD BACK LIGHT (VP-D270(i) only). Use the MENU SELECTOR to adjust the value of BRIGHT ADJUST and COLOUR ADJUST. You can set values for BRIGHT ADJUST between 00 ~ 35 and COLOUR ADJUST between 00 ~ 35.
Page 33: Playing Back A Tape You Have Recorded On The Lcd
To stop the PLAY operation, press the Notes You can also view the picture on a TV screen, after connecting the camcorder to a TV or VCR. (see page 70) Various functions are available in playback mode. (see page 72) (STOP) button.
Page 34: Adjusting The Lcd During Play
- Follow the instructions below to decrease or mute speaker volume in the PLAYER mode. - Take the following steps to lower the volume or mute the sound while playing a tape on the camcorder. 1. Set the power switch to PLAYER mode.
Page 35: Advanced Recording
Advanced Recording Use of various Functions Setting menu items MENU SUB MENU CLOCK SET Setting the time WL. REMOTE Using the Remote Control INITIAL BEEP SOUND Play Various Sound Effects SHUTTER SOUND Sound Effect for the photo button DEMO Demonstration PROGRAM AE Selecting the PROGRAM AE Function WHT.
Page 36: Set The Camcorder To Cam Or Player Mode And M.rec Or M.play Mode (Vp-D230(I)/D250(I)/D270(I) Only)
: This Function works in VP-D230(i)/D250(i)/D270(i) MODEL only. : This Function works in VP-D200i/D230i/D250i/D270i MODEL only. Set the camcorder to CAM or PLAYER mode and M.REC or M.PLAY mode (VP-D230(i)/D250(i)/D270(i) only) 1. Press the MENU button. The MENU OSD is displayed. The cursor ( 2.
Page 37: Availability Of Functions In Each Mode
Advanced Recording Availability of functions in each mode Requested Digital functions Mode Operating D.ZOOM Mode D.ZOOM PHOTO SLOW SHUTTER Digital Special Effects NIGHT CAPTURE O : The requested mode will work in this operating mode. : You cannot change the requested mode. : The operating mode will be released and the requested mode will work.
Page 38: Clock Set
ENGLISH Advanced Recording CLOCK SET CLOCK setup works in CAM, PLAYER, M.REC and M.PLAY modes. The DATE/TIME is automatically recorded onto a tape. Before recording, please set the DATE/TIME. 1. Press the MENU button. The menu list will appear. 2. Move the MENU SELECTOR to highlight INITIAL and push the MENU SELECTOR. 3.
Page 39: Wl. Remote (Vp-D230(I)/D250(I)/D270(I) Only)
WL. REMOTE (VP-D230(i)/D250(i)/D270(i) only) The WL.REMOTE function works in CAM, PLAYER, M.REC, M.PLAY modes. The WL.REMOTE option allows you to enable or disable the remote control for use with the camcorder. 1. Press the MENU button. The menu list will appear.
Page 40: Beep Sound
ENGLISH Advanced Recording BEEP SOUND The BEEP SOUND function works in CAM, PLAYER, M.REC, M.PLAY modes. Use the MENU to setup the BEEP SOUND function. Select whether or not you want to hear a beep sound whenever you change a setup value. 1.
Page 41: Shutter Sound (Vp-D230(I)/D250(I)/D270(I) Only)
Advanced Recording SHUTTER SOUND (VP-D230(i)/D250(i)/D270(i) only) You can hear SHUTTER SOUND only when the PHOTO function is working. Determine whether or not you wish to hear a SHUTTER SOUND when using the DSC feature. 1. Set the mode switch to MEMORY STICK. 2.
Page 42: Demonstration
Advanced Recording DEMONSTRATION Demonstration automatically shows you the major functions that are included with your camcorder so that you may use them more easily. The DEMONSTRATION function may only be used in the CAM mode without a tape inserted in the camcorder.
Page 43: Program Ae
Advanced Recording PROGRAM AE The PROGRAM AE function works in CAM mode only. The PROGRAM AE mode allows you to adjust shutter speeds and apertures to suit different recording conditions. They give you creative control over the depth of field. AUTO mode - Auto balance between the subject and the background.
Page 44: Setting The Program Ae
ENGLISH Advanced Recording Setting the PROGRAM AE 1. Press the MENU button. The menu list will appear. 2. Move the MENU SELECTOR to highlight CAMERA and push the MENU SELECTOR. 3. Select PROGRAM AE from the submenu. 4. Push the MENU SELECTOR to enter the sub-menu. 5.
Page 45: Wht. Balance (White Balance)
OUTDOOR ( ) : This controls the WHITE BALANCE according to the outdoor ambience. - In daylight, especially for close up and where the subject is of one dominant colour. 1. Set the camcorder to CAM mode. 2. Press the MENU button. The menu list will appear.
Page 46: Zooming In And Out With Digital Zoom
ENGLISH Advanced Recording Zooming In and Out with DIGITAL ZOOM Digital Zoom works in CAM mode only. Zooming In and Out Zooming is a recording technique that lets you change the size of the subject in a scene. For more professional looking recordings, do not use the zoom function too often. You can zoom using variable zoom speeds.
Page 47: Digital Zoom
We recommend that you use the DIS feature with DIGITAL ZOOM for picture stability. (see page 48) 1. Set the camcorder to CAM mode. 2. Press the MENU button. The menu list will appear.
Page 48: Dis (Digital Image Stabilizer)
Recording a small object close-up Recording and walking at the same time Recording through the window of a vehicle 1. Set the camcorder to CAM mode. 2. Press the MENU button. The menu list will appear. 3. Move the MENU SELECTOR highlight to CAMERA and push the MENU SELECTOR.
Page 49: Dse(Digital Special Effects) Select
Advanced Recording DSE(Digital Special Effects) SELECT The DSE function works in CAM mode only. The digital effects enable you to give a creative look to your recording by adding various special effects. Select the appropriate digital effect for the type of picture that you wish to record and the effect you wish to create. There are 9 DSE modes.
Page 50: Selecting An Effect
ENGLISH Advanced Recording Selecting an effect 1. Set the camcorder to CAM mode. 2. Press the MENU button. The menu list will appear. 3. Move the MENU SELECTOR to highlight CAMERA and push the MENU SELECTOR. 4. Select DSE SELECT from the submenu.
Page 51: Rec Mode
The REC MODE function works in both CAM and PLAYER (VP-D200i/D230i/D250i/D270i only) modes. This camcorder records and plays back in SP (standard play) mode and in LP (long play) mode. SP (standard play): This mode permits 60 minutes of recording time with a DVM60 tape.
Page 52: Audio Mode
AUDIO MODE The AUDIO MODE function works in CAM and PLAYER (VP-D200i/D230i/D250i/D270i only) modes. This camcorder records sound in two ways. (12bit, 16bit) 12bit : You can record two 12bit stereo sound tracks. The original stereo sound can be recorded onto the MAIN (SOUND1) track.
Page 53: Wind Cut
The WIND CUT function minimizes wind noise or other noise while recording. - When the wind cut is on, some low sounds are eliminated along with the sound of the wind. 1. Set the camcorder to CAM mode. 2. Press the MENU button.
Page 54: Date/Time
ENGLISH Advanced Recording DATE/TIME The DATE/TIME function works in CAM, PLAYER, M.REC and M.PLAY modes. The date and time are automatically recorded on a special data area of the tape. 1. Press the MENU button. The menu list will appear. 2.
Page 55: Tv Display
OFF: The OSD appears in the LCD screen only. ON: The OSD appears in the LCD screen, View Finder and TV. Use the DISPLAY button located at the left side of the camcorder to turn ON/OFF all of the OSD displayed on the LCD/View Finder/TV.
Page 56: Using Quick Menu
ENGLISH Advanced Recording Using Quick Menu(Navigation Menu) Quick menu is available only in CAM and M.REC mode. Quick menu is used to adjust camera functions by simply using the MENU SELECTOR button. This feature is useful for when you want to make simple adjustments without having to access the menus and submenus. DATE/TIME (see page 54) - Each time you select DATE/TIME and push the MENU SELECTOR, it will be displayed in the order of DATE - TIME - DATE/TIME - OFF.
Page 57: Setting The Quick Menu
- You can set values for SHUTTER SPEED and EXPOSURE by selecting ( For more information, see the next chapter. Setting the Quick menu 1. Set the camcorder to CAM mode. 2. Move the MENU SELECTOR to select a function you want and then push the MENU SELECTOR to change the values.
Page 58: Shutter Speed & Exposure
The image may not seem as smooth when a high shutter speed is set. The camcorder returns to the auto shutter setting and auto exposure setting when you set the NIGHT CAPTURE to ON, or change to the EASY, SLOW SHUTTER modes.
Page 59: Slow Shutter(Low Shutter Speed)
Advanced Recording SLOW SHUTTER (Low Shutter Speed) The SLOW SHUTTER function works in CAM mode only. The shutter speed can be controlled, allowing you to record slow moving objects. 1. Set the power switch to CAM mode. 2. Press the SLOW SHUTTER button. 3.
Page 60: Easy Mode (For Beginners)
- If you want to use these functions, you must first switch the EASY mode off. The EASY mode settings are deleted when the battery pack is uninstalled from the camcorder and therefore, they must be reset when a battery pack has been replaced.
Page 61: Mf/Af (Manual Focus/Auto Focus)
Manual Focusing In the following cases you may obtain better results by adjusting the focus manually. a. A picture containing several objects, some close to the camcorder, others further away. b. A person enveloped in fog or surrounded by snow.
Page 62: Blc (Back Light Compensation)
ENGLISH Advanced Recording BLC (Back Light Compensation) BLC works in CAM/M.REC mode. Back lighting exists when the subject is darker than the background: The subject is in front of a window. The person to be recorded is wearing white or shiny clothes and is placed against a bright background;...
Page 63: Fade In And Out
Advanced Recording Fade In and Out The FADE function works in CAM mode only. You can give your recordings a professional look by using special effects such as fading in at the beginning of a sequence or fading out at the end of a sequence. To Start Recording 1.
Page 64: Audio Dubbing (Vp-D230(I)/D250(I)/D270(I) Only)
When you wish to dub using the External A/V input, connect the AUDIO/VIDEO cable to the camcorder by inserting the AUDIO/VIDEO cable into the AV Jack at the right side of the camcorder. (VP-D230i/D250i/D270i only) - Press the MENU button, move the MENU SELECTOR to highlight A/V and push the MENU SELECTOR.
Page 65: Dubbed Audio Playback
Advanced Recording Dubbed audio Playback 1. Insert the dubbed tape and press MENU button. 2. Move the MENU SELECTOR to highlight A/V. 3. Push the MENU SELECTOR to enter the sub-menu. 4. Use the MENU SELECTOR to select AUDIO SELECT from the submenu. 5.
Page 66: Photo Image Recording
2. Reless the PHOTO button and press the PHOTO button again in 2 seconds. The still picture is recorded for about 6~7 seconds. 3. After the PHOTO has been recorded, the camcorder returns to STBY mode. Searching for a PHOTO picture The PHOTO SEARCH works in PLAYER mode only.
Page 67: Night Capture (0 Lux Recording)
The NIGHT CAPTURE function works in CAM/M.REC mode. The NIGHT CAPTURE function enables you to record a subject in darkness. 1. Set the camcorder to CAM mode. 2. Slide the NIGHT CAPTURE switch to ON. (NIGHT CAPTURE indicator) appears on the LCD monitor.
Page 68: Power Night Capture
NIGHT CAPTURE switch is turned on. When you work in POWER NIGHT CAPTURE mode, POWER NIGHT CAPTURE icon appears on the LCD continuously. 1. Set the camcorder to CAM mode. 2. Turn on the NIGHT CAPTURE switch, and then press the SLOW SHUTTER button.
Page 69: Various Recording Techniques
In some situations different recording techniques may be required for more dramatic results. Note Please rotate the LCD screen carefully as excessive rotation may cause damage to the inside of the hinge that connects the LCD screen to the Camcorder. 1. General recording. 2. Downward recording.
Page 70: Playback
You may use the S-VIDEO plug to obtain better quality pictures if you have a S-VIDEO connector on your TV. Even if you use a S-VIDEO plug, you need to connect an audio cable. If you connect the cable to the AV Jack, you will not hear sound from the speakers of CAMCORDER. Audio input...
Page 71: Connecting To A Tv Which Has No Audio And Video Input Jacks
Playback Connecting to a TV which has no Audio and Video input jacks You can connect your camcorder to a TV through a VCR. 1. Connect the camcorder and VCR with the AUDIO/VIDEO cable. The yellow plug : Video The white plug : Audio(L) - Mono The red plug : Audio(R) 2.
Page 72: Various Functions While In Player Mode
The F.ADV(Frame advance), X2, SLOW buttons are located on the Remote Control only. (VP-D230(i)/D250(i)/D270(i) only) To prevent tape and head-drum wear, your camcorder will automatically stop if it is left in STILL or SLOW modes for more than 5 minutes.
Page 73: Frame Advance (To Play Back Frame By Frame) (Vp-D230(I)/D250(I)/D270(I) Only)
Playback Frame advance (To play back frame by frame) (VP-D230(i)/D250(i)/D270(i) only) Press the F.ADV button on the Remote Control while in Still mode. The F.ADV function works in still mode only. To resume normal playback, press the Forward frame advance Press the F.ADV button on the remote control in Still mode.
Page 74: Zero Memory (Vp-D230(I)/D250(I)/D270(I) Only)
ENGLISH Playback ZERO MEMORY (VP-D230(i)/D250(i)/D270(i) only) The ZERO MEMORY function works in both CAM and PLAYER modes. You can mark a point on a tape that you want to return to following playback. 1. Press the ZERO MEMORY button on the remote control before the recording or during the playback at the point you wish to return.
Page 75: Pb Dse (Playback Digital Special Effects)
You cannot apply the PB DSE function to the pictures which are being input from the external. Once you modify an image using the PB DSE function, it cannot be imported to your PC from the camcorder’s DV jack. ENGLISH...
Page 76: Pb Zoom
6. To cancel the PB ZOOM function, press the PB ZOOM or STOP button. Notes You cannot apply the PB ZOOM function to the pictures which are being input from an external video source. The PB ZOOM image cannot be imported to your PC from the camcorder’s DV jack. ZOOM TAPE EJECT...
Page 77: Recording In Player Mode (Vp-D200I/D230I/D250I/D270I Only)
When you record the images being played back on analog VCR, if they are not being played back in normal speed, (for example, more than double speed or slow playback), only gray image appears on the camcorder. If you want to see the camcorder picture with a TV set AV IN/OUT menu to OUT. ENGLISH...
Page 78: Ieee 1394 Data Transfer
If a product has a DV port, you can transfer data by connecting to the DV port using the correct cable. !!! Please be careful since there are two types of DV ports, (4pin, 6pin). This camcorder has a 4pin terminal.
Page 79: System Requirements
6. To stop recording, press the (STOP) button. Notes When using this camcorder as a recorder, the pictures that appear on a monitor may seem uneven, however recorded pictures will not be affected. Operations are not guaranteed for all the recommanded computer environments mentioned above.
Page 80: Usb Interface (Vp-D230(I)/D250(I)/D270(I) Only)
You can transfer an image to a PC via a USB connection. If you transfer data to a PC, you need to install the software (Driver, DVC Media 5.1, Windows Media Player 9.0, DirectX 9.0a) supplied with the camcorder. System Requirements ®...
Page 81: Installing Dvc Media 5.1 Program
1. Set the mode switch to Tape, set the power switch to CAM. 2. Connect one end of the USB cable to the USB jack on the camcorder and the other end to the USB connector on your computer. ®...
Page 82: Using The "Removable Disk" Function
1. Set the mode switch to memory, set the power switch to CAM or PLAYER. 2. Connect one end of the USB cable to the USB jack on the camcorder and the other end to the USB connector on your computer.
Page 83: Digital Still Camera Mode (Vp-D230(I)/D250(I)/D270(I) Only)
Digital Still Camera mode (VP-D230(i)/D250(i)/D270(i) only) MEMORY STICK (VP-D250(i)/D270(i) only) The Memory Stick stores and manages still images recorded by the camera. Memory Stick Functions Recording still images and MPEG4 movie Viewing still images and MPEG4 movie Single Slide show (still images only) Multi display Protecting images against accidental erasure Deleting images recorded on a Memory Stick...
Page 84: Inserting And Ejecting The Memory Stick
Do not bend, drop or apply strong shock to Memory Stick. After pulling the Memory Stick out from the camcorder, please keep the Memory Stick in a soft case to prevent static shock. The stored contents may be changed or lost as a result of misuse, static electricity, electric noise or repair.
Page 85: Structure Of Folders And Files On The Memory Stick
Selecting the CAMCORDER mode You can use this camcorder as a Digital Still Camera (DSC). You have to set the mode switch to MEMORY STICK position to use this camcorder as Digital Still Camera. M.REC mode (Memory RECORD mode) 1. Set the mode switch to MEMORY STICK.
Page 86: Memory File Number
ENGLISH Digital Still Camera mode (VP-D230(i)/D250(i)/D270(i) only) MEMORY FILE NUMBER File numbers will be given to images in order of recording when still images are stored in the Memory Stick. MEMORY FILE NUMBERS may be set as follows: SERIES: When there are existing files, the new image will be named as the next number in the sequence. RESET - When there are no files stored in the Memory Stick: The file numbering starts from 0001 - When there are files stored in the Memory Stick: File numbering will continue after the last file's number...
Page 87: Selecting The Image Quality
Digital Still Camera mode (VP-D230(i)/D250(i)/D270(i) only) Selecting the image quality You can select the quality of a still image to be recorded. Select the image quality 1. Set the mode switch to MEMORY STICK. 2. Set the power switch to the CAM mode. 3.
Page 88: Recording Still Images To A Memory Stick In M.rec Mode
If you do not wish to record, release the button and wait for more than 2 seconds. 4. Release the PHOTO button and press the PHOTO button again in 2 seconds. The still image is recorded to the Memory Stick. While the camcorder is recording the still image, “ ” appears on the screen. MEMORY...
Page 89: Recording An Image From A Cassette As A Still Image
If you do not wish to record, release the PHOTO button, select the image again. 5. Press the PHOTO and press the PHOTO button again in 2 seconds. The still image is recorded to the Memory Stick. While the camcorder is recording the still image, “ ” appears on the screen. ENGLISH...
Page 90: Viewing Still Images
ENGLISH Digital Still Camera mode (VP-D230(i)/D250(i)/D270(i) only) Viewing Still images You can playback and view still images recorded on the Memory Stick. There are 3 ways to view recorded images. Single : To view an image frame by frame. Slide show : To view all images automatically and in consecutive order. Multi display : To view 6 images at once.
Page 91: To View The Multi Display
Digital Still Camera mode (VP-D230(i)/D250(i)/D270(i) only) To view the Multi Display 1. Set the mode switch to MEMORY STICK. 2. Set the power switch to PLAYER mode. The last recorded image appears. 3. To view six stored images on single screen, press the MULTI button. A selection mark ( ) appears under the image.
Page 92: Copying Still Images From A Cassette To Memory Stick
4. Move the MENU SELECTOR to highlight PHOTO COPY and push the MENU SELECTOR. All still images that recorded on a cassette will be copied to a Memory Stick. 5. The camcorder automatically performs the photo search to find still images and copying starts. 6. Press (STOP) button to stop copying.
Page 93: Marking Images For Printing
Digital Still Camera mode (VP-D230(i)/D250(i)/D270(i) only) Marking images for printing This camcorder supports the DPOF (Digital Print Order Format) print format. You can automatically print images recorded on a Memory Stick with a printer supporting DPOF. There are 2 ways to make a PRINT MARK.
Page 94: Protection From Accidental Erasure
ENGLISH Digital Still Camera mode (VP-D230(i)/D250(i)/D270(i) only) Protection from accidental erasure You can protect important images from accidental erasure. If you execute FORMAT, all images including protected images will be erased. 1. Set the mode switch to MEMORY STICK. 2. Set the power switch to PLAYER. The last recorded image appears.
Page 95: Deleting Still Images
Digital Still Camera mode (VP-D230(i)/D250(i)/D270(i) only) Deleting Still images You can erase the still images recorded on the Memory Stick. If you want to delete protected images, you must first deactivate the image protection. An image which has been deleted cannot be recovered. 1.
Page 96: Formatting The Memory Stick
You can use the MEMORY FORMAT functions to completely delete all images and options on the Memory Stick, including protected images. The format function restores the Memory Stick to its initial state. The Memory Stick supplied with this camcorder has been formatted already. Attention If you execute the MEMORY FORMAT function, all images will be erased completely and erased images cannot be recovered.
Page 97: Mpeg Recording
You can record the moving picture images with audio on the Memory Stick. Saving the pictures captured by a camera as a moving picture file onto MEMORY STICK 1. Check whether MEMORY STICK is inserted into the camcorder. If it is not in the camcorder, insert it onto the slot.
Page 98: Selecting The Moving Picture Sizes
ENGLISH Digital Still Camera mode (VP-D230(i)/D250(i)/D270(i) only) Selecting the moving picture sizes 1. Set the mode switch to MEMORY STICK position. 2. Set the power switch to CAM mode. 3. Press the MENU button. 4. Move the MENU SELECTOR to highlight MEMORY. 5.
Page 99: Mpeg Playback
If sharp G.726 Audio Codec is not properly installed on your PC, it could not play Audio in the MPEG4 file. The moving picture images that you recorded in the Memory Stick might not be allowed to play by the camcorder of another brands.
Page 100: Maintenance
At the end of a recording you must remove the power source. When recording with a Lithium Ion Battery Pack, leaving the pack on the camcorder can reduce the life span of the battery. Hence, it should be removed from the camcorder.
Page 101: Cleaning And Maintaining The Camcorder
Maintenance Cleaning and Maintaining the Camcorder Cleaning the Video Heads To ensure normal recording and clear pictures, clean the video heads when the playback pictures display square block-shaped noise or distortion, or a blue screen appears. 1. Set the power switch to PLAYER mode.
Page 102: Using Your Camcorder Abroad
Power sources You can use your camcorder in any country or area with the supplied AC Power Adapter within 100V to 240V, 50/60 Hz. Use a commercially available AC plug Adapter, if necessary, depending on the design of the local wall outlet.
Page 103: Troubleshooting
Moisture Condensation If the camcorder is brought directly from a cold place to a warm place, moisture may condense inside the camcorder, on the surface of the tape, or on the lens. In this condition, the tape may stick to the head drum and be damaged or the unit may not operate correctly.
Page 104: Self Diagnosis Display In M.rec/M.play Mode (Vp-D230(I)/D250(I)/D270(I) Only)
Release the write protect tab on the Memory Stick. Cancel the protect of image. Format a Memory Stick or insert Memory Stick recorded on this camcorder. Format a Memory Stick or change to a new Memory Stick. Format a Memory Stick. (see page 96) Wait until Delete has been finished.
Page 105 Troubleshooting If these instructions do not solve your problem, contact your nearest Samsung authorized service centre. Symptom Explanation/Solution You cannot switch the Check the battery pack or the AC Power Adapter. camcorder on. START/STOP button Check the POWER switch is set to CAM.
Page 106: Specifications
ENGLISH Specifications Model name: VP-D200(i)/D230(i)/D250(i)/D270(i) System Video signal Video recording system 2 rotary heads, Helical scanning system Audio recording system Rotary heads, PCM system Usable cassette Digital video tape (6.35mm width): Mini DV cassette Tape speed SP: approx. 18.83mm/s Tape recording time SP: 60 minutes (when using DVM 60), LP: 90 minutes (when using DVM 60) FF/REW time Approx.
Page 107: Index
INDEX - A - Accessories ... 12 Audio dubbing ... 64 AUDIO MODE ... 52 AV IN/OUT ... 77 - B - Battery Pack ... 24 BEEP SOUND ... 40 BLC ... 62 - C - Cassette ... 27 Cleaning ... 101 CLOCK SET ...
Page 108: Power Sources (United Kingdom Only)
ENGLISH Power Sources (United Kingdom Only) The mains lead on the power adapter is supplied with a moulded plug incorporating a fuse. The value of the fuse is indicated on the pin face of the plug and, if it requires replacing, a fuse approved to BS1362 of the same rating must be used.
Page 109 ENGLISH THIS CAMCORDER IS MANUFACTURED BY: ELECTRONICS *Samsung Electronics’ Internet Home Page AD68-00709E(01) United Kingdom http://www.samsungelectronics.co.uk...

This manual is also suitable for:

Vp-d200 Vp-d230 Vp-d250 Vp-d270 Scd230 Vp-d230i ... Show all

Samsung VP-D200(i) Owner's Instruction Book

English

Notes and Safety Instructions

Getting to Know Your Camcorder

Preparation

BASIC Recording

Advanced Recording

Playback

Recording in PLAYER Mode (VP-D200I/D230I/D250I/D270I Only)

IEEE 1394 Data Transfer

USB Interface (VP-D230(I)/D250(I)/D270(I) Only)

Digital Still Camera Mode (VP-D230(I)/D250(I)/D270(I) Only)

Maintenance

Troubleshooting

Specifications

Index

Power Sources (United Kingdom Only)

Quick Links

Related Manuals for Samsung VP-D200(i)

Summary of Contents for Samsung VP-D200(i)

This manual is also suitable for:

Table of Contents