Adjustments When Replacing Parts - Canon Unit-L1 Service Manual

■ Functional Setting Items
Item
Setting the number of fold-enhanc-
ing operation of the Z-fold

Adjustments When Replacing Parts

No Item
1 Handling when replacing the Paper Folding
Unit Controller PCB
2 Handling when replacing the Upper Cover
Unit
3 Adjustment when replacing the Fold-enhanc-
ing Unit
4 Handling when replacing the Pushing Plate
HP Sensor (PS2)
5 Handling when replacing the Post-fold Sen-
sor (PS6)
6 Handling when replacing the Fold-enhancing
Motor (M4)
Service Mode
(SORTER > OP-
TION)
PF-ENHNC • When the fold of the Z-fold output
(multiple sheets stack) is swollen.
After replacing parts, execute the following service
mode.
• Adjustment of the tab length of Z-fold:
SORTER> ADJUST> PF-T-EDG
Position adjustment
After replacing parts, execute the following service
mode.
• Auto adjustment of the fold-enhancing control val-
ues:
SORTER> OPTION> PF-MTR
After replacing parts, execute the service mode in the
following order.
• Adjustment of the tab length of Z-fold:
SORTER> ADJUST> PF-T-EDG
• Adjustment of the fold position of Z-fold paper:
SORTER> ADJUST> PF-A3Z1
SORTER> ADJUST> PF-B4Z1
SORTER> ADJUST> PF-A4Z1
SORTER> ADJUST> PF-LDRZ1
SORTER> ADJUST> PF-LGLZ1
SORTER> ADJUST> PFLTRRZ1
After replacing parts, execute the following service
mode.
• Adjustment of the tab length of Z-fold:
SORTER> ADJUST> PF-T-EDG
After replacing parts, execute the following service
mode.
• Auto adjustment of the fold-enhancing control val-
ues:
SORTER> OPTION> PF-MTR
77
Use Case
Description
-
5. Adjustment
Remarks
When 1 is set, productivity is
decreased.
Refer to
"Handling When Replacing
the Paper Folding Unit
Controller PCB " on page
80
"Handling When Replacing
the Upper Cover Unit " on
page 81
"Adjustment Procedure" on
page 49
"Handling When Replacing
the Pushing Plate HP Sen-
sor (PS2) " on page 85
"Handling When Replacing
the Post-fold Sensor
(PS6) " on page 85
"Handling When Replacing
the Fold-enhancing Motor
(M4)" on page 85