Connect Tracker And Router To App - Honeywell FFP21996 User Manual

USE AND OPERATION (CONTINUED)

Connect Tracker and Router to App

1. Connect your tracker to the router / charging dock, connect your
router / charging dock USB connector to a 5V1A charging head and plug all
devices in to an outlet to automatically power on. Press and hold the
tracker power button for about 6 seconds to enter pairing mode. The small
blue light on the Tracker will continuously flash when in pairing mode. If it is
not connected to your App within 5 minutes, it will it will automatically exit
pairing mode (blue light will stop flashing).
2. Make sure that your Bluetooth and Wi-Fi on your cell phone are both
activated, and your Wi-Fi is connected.
3. Open your Honeywell Smart Pets App and navigate to the Home page by
clicking the icon at the bottom of the screen.
4. Click the + button in the top right corner of the Home Page, then click
"Add Device" (see picture 1).
Add Device
Searching for nearby devices. Make sure your device
has entered pairing mode.
Discovering Devices...
Add
Add Manually
1
EN 10