Table of Contents
Advertisement
USB to PC
The USB to PC applet enables you to switch between RNDIS (Remote Network Driver Interface
Specification) USB and Serial USB communication.
Dolphin 7600II terminals default to Serial USB. Honeywell recommends using Serial USB.
To change this setting, tap Start > Settings > Connections tab > USB to PC
. The enable option
is not selected, which indicates Serial USB.
To switch to RNDIS USB, select Enable advanced network functionality and tap OK to save. (Wait as
the terminal makes the change.)
7 - 12
Rev (a) 01
Dolphin® 7600II Mobile Computer User's
5/29/08
Guide–Preliminary
Advertisement
Table of Contents
