Installing The Pcm600 Software; Connecting The Cables - Hitachi Relion 670 Series Quick Start Manual

Section 7
Connecting to the PCM600 software
7.3

Installing the PCM600 software

1. Download the latest version of PCM600 software from
2. Follow the instructions in the installation wizard to install the software.
7.4

Connecting the cables

1. Connect the RJ45 Ethernet cable between the front port of the IED and the PC.
IEC18000031 V2 EN-US
Figure 15:
The default IP address of the front port of the IED, 10.1.150.3, is used to establish a connection.
34
RJ45 cable connection to the front port of the IED
© 2018 - 2023 Hitachi Energy. All rights reserved.
1MRK500129-UEN Rev. J
GUID-D0D14BE6-81C5-4D16-9D5F-2536143720CE v2
ABB Software Library.
GUID-C03819DA-1243-4C59-A74F-30334C267602 v2
670/650 series
Quick start guide