NETGEAR Nighthawk AX6 User Manual page 43

Nighthawk AX6 AX2700 WiFI Cable Modem Router Model CAX30
To specify the pool of IP addresses that the modem router assigns:
1. Launch a web browser from a computer or mobile device that is connected to the
router network.
2. Enter http://www.routerlogin.net.
A login window opens.
3. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Setup > LAN Setup.
The LAN Setup page displays.
5. Make sure that the Use Router as DHCP Server check box is selected.
6. Specify the range of IP addresses that the router assigns:
a. In the Starting IP Address field, type the lowest number in the range.
This IP address must be in the same subnet as the modem router.
b. In the Ending IP Address field, type the number at the end of the range of IP
addresses.
This IP address must be in the same subnet as the modem router.
7. Click the Apply button.
Your settings are saved.
The modem router delivers the following address information to any LAN device that
requests a DHCP address:
• An IP address from the range that you define
• Subnet mask
• Gateway IP address (the modem router's LAN IP address)
• DNS server IP address (the modem router's LAN IP address)
Manage Network Settings 43 User Manual