Brakes - Honda CB Unicorn 160 Owner's Manual

BRAKES

Front Brake
This vehicle has a front hydraulic and rear
mechanical drum brake.
As the brake pads wear, brake fluid level
drops.
There are no adjustments to perform, but
fluid level and pad wear must be inspected
periodically. The system must be inspected
frequently to ensure there are no fluid leaks.
If the control lever free travel becomes
excessive and the brake pads are not worn
beyond the recommended limit (page 71),
there is probably air in the brake system
and it must be bleed. See your Honda
dealer for this service.
Front Brake Fluid Level:
With the vehicle in an upright position,
check the fluid level. It should be above the
lower level mark (1). If the level is at or
below the lower level mark (1), check the
brake pads for wear (page 71).
20
Worn pads should be replaced. If the pads
are not worn, have your brake system
inspected for leaks.
The recommended brake fluid is Honda DOT
3 or 4 brake fluid from a sealed container,
or an equivalent.
(1) Lower level mark
Other Checks:
Make sure there are no fluid leaks. Check
for deterioration or cracks in the hoses and
fittings.
(1)