Honda CB Unicorn 160 Owner's Manual page 24

Digital Clock
The digital clock will show hours and
minutes up to 11:59.
To adjust the time, proceed as follows:
1. Turn the ignition switch ON.
2. Press and hold the both buttons (1)
and (2) for more than 3 seconds
simultaneously. The clock will be set in
the adjust mode with the hour flashing.
(1)
(1) Select button
(2) Set button
18
3. To set the hour, press the set button
until the desired hour is displayed.
• Quick setting - press and hold the
set button
appears.
4. Press the select button (1) when the
display reaches the desired hour.
The minute display will be flashing.
(2)
5. To set the minute, press the reset button
until the desired minute appears.
• Quick setting - press and hold the
reset button until the desired minute
appears.
6. Press the select button when the display
reaches the desired minute.
The display will stop flashing.
until the desired hour