Pendant Mounting - HIKVISION TURBO HD DS-2CE57H0T-VPITE User Manual

Wall Mounting with Aluminum Alloy Bracket
Steps:
1. Install the bracket.
1) Install the bracket on the wall with four M6 × 75
expansion bolts.
2) Rotate the installation adapter to the bracket.
3) Tighten the M4 × 6 screw.
2. Refer to steps 3 to 8 of 2.1.1 Ceiling Mounting
without Junction Box to fix the camera to the
bracket and finish installation.
Figure 2-11 Fix the Camera to the Bracket

2.1.4 Pendant Mounting

Before you start:
You need to purchase a pendant mount first.
Steps:
1. Install the bracket on the ceiling with four M6 × 75
expansion bolts.
Figure 2-12 Install the Bracket to the Ceiling
2. Remove the bubble by loosening the screws.
3. Secure the mounting base to the installation
adapter of the bracket with three M4 × 10 screws.
Figure 2-13 Secure the Mounting Base to the
4. Route and connect the cables.
5. Rotate the installation adapter to the bracket.
6. Tighten the M4 × 6 screw.
Figure 2-10 Install the Bracket
Installation Adapter
M4 × 6 Screw
5