Overview Of Type Iv Camera; Overview Of Type V Camera; Installation; Installation Of Type I Camera - HIKVISION TURBO HD DS-2CE57H0T-VPITE User Manual

1.2.4 Overview of Type IV Camera

Figure 1-4 Overview of Type IV Camera

1.2.5 Overview of Type V Camera

Figure 1-5 Overview of Type V Camera

2 Installation

Before you start
Make sure that the device in the package is in good

condition and all the assembly parts are included.
Make sure that all the related equipment is power-off

during the installation.
Check the specification of the products for the

installation environment.
Check whether the power supply is matched with

your power output to avoid the damage.
Make sure the wall is strong enough to withstand

three times the weight of the camera, and the
mount.
If the wall is cement, insert expansion bolts before

installing the camera. If the wall is wooden, use
self-tapping screws to secure the camera.
If the product does not function properly, contact

your dealer or the nearest service center. Do NOT
disassemble the camera for repair or maintenance by
yourself.

2.1 Installation of Type I Camera

2.1.1 Ceiling Mounting without Junction Box

Steps:
1. Paste the drill template to the ceiling.
2. Drill the screw holes and cable hole (optional) in the
ceiling according to the drill template.
Note:
Cable hole is required when adopting the ceiling
outlet to route cables.
3. Loosen the set screws with a hex wrench (supplied)
to remove the bubble.
Bracket
Main Body
Lens
120°均布
1
A
Drill Template
Hole A: for cables routed through the ceiling
screw hole 1: for Mounting Base
1
Figure 2-1 Drill Template
Video Cable
Screw
Hole
1
2
Power Cord