Table of Contents
Advertisement
1. Insert an SD card into the camera.
CAUTION — Do not force the SD card into the camera or you may damage the card and the
camera. The SD card can only be inserted in one direction.
2. Access the camera's web interface to enable the onboard storage feature. For more information, see
the Avigilon High Definition H4 and H5 IP Camera Web Interface User Guide.
Installing the Dome Cover
Be careful not to touch or scratch the dome bubble. Any marks or fingerprints on the dome bubble will
cause unwanted reflections in the -IR model.
1. Attach the lanyard to the dome cover.
2. Remove the protective cover on the inside of the dome bubble.
3. Attach the dome cover to the base by tightening the screws with the star-shaped driver.
4. Remove the protective cover on the outside of the dome bubble.
Zooming and Focusing the Dome Camera
Ensure this procedure is performed after the dome cover is installed, so you can accommodate for the
focus shift caused by the dome bubble.
Installing the Dome Cover
15
Advertisement
Table of Contents
