Table of Contents
Advertisement
Ethernet port
Security button
Warning: Do not press the Security button on the Powerline adapter until
installation is complete and the adapters are communicating with each other
(indicated by the blinking Pick A Plug LED). Pressing this button too soon can
temporarily disable Powerline communication. If this occurs, use the Factory
Reset button to return the Powerline adapter to its factory default settings.
Note:
If, after creating a secure Powerline network, you want to add another
adapter, perform a factory reset on all of the adapters and then perform this
procedure.
Connect your computers, networking equipment, and other
equipment that uses an Ethernet cable, to your Powerline
network.
Use the Security button to create a secure Powerline
network.
6
Advertisement
Table of Contents
