15.10
Changing the parking light bulb
Note
Impairments to reflectors and lamps Grease on the reflector reduces the emitted light.
Grease on the bulb will evaporate due to the heat and be deposited on the reflector.
Grease residue on the bulb reduces heat dissipation and increases the heat of the bulb, thus reducing its
service life.
–
Clean and degrease the bulbs before mounting.
–
Do not touch the bulbs with your bare hands.
–
Pull out headlight bulb
–
Insert the new headlight bulb.
Headlight (H4/socket P43t) (
–
Insert the protection cap with the bulb socket into the reflec-
tor and turn it clockwise all the way.
Info
Ensure that O-ring
E00037-10
Finishing work
–
Install the headlight mask with the headlight. (
–
Check the headlight setting. (
Preparatory work
–
Remove the headlight mask with the headlight. (
Main work
–
Pull bulb socket
–
Pull parking light bulb
–
Insert a new parking light bulb in the bulb socket.
Position light (W5W / socket W2.1x9.5d) (
–
Insert the bulb socket in the reflector.
E00038-10
Finishing work
–
Install the headlight mask with the headlight. (
–
Check the headlight setting. (
ELECTRICAL SYSTEM 15
2
.
p. 121)
3
is seated properly.
p. 92)
1
out of the reflector.
2
out of the bulb socket.
p. 92)
p. 89)
p. 89)
p. 121)
p. 89)
91