12 SERVICE WORK ON THE CHASSIS
12.15
12.16
54
V00796-10
Take off the side cover
V01485-10
Mounting the side cover
V01486-10
Main work
–
1
Remove screws
.
–
2
Remove screws
.
Info
A tool for removing and mounting these screws is
located in holder
–
Take off the left side cover.
–
Open the tool set compartment and store tool set
–
Close the tool set compartment.
–
Position the left side cover.
–
Mount and tighten screws
Guideline
Screw, trim
–
Mount and tighten screws
Guideline
Screw, front spoiler
–
Make sure the tool is reinserted in holder
Finishing work
–
Mount the seat. (
p. 53)
Preparatory work
–
Remove the seat. (
p. 52)
Main work
–
1
Remove screws
and
–
Take off the side cover.
–
Repeat these steps on the opposite side.
Main work
–
Position the side cover, and mount and tighten screws
Guideline
Screw, trim
–
Mount and tighten screws
Guideline
Screw, front spoiler
–
Repeat these steps on the opposite side.
Finishing work
–
Mount the seat. (
p. 53)
A
on the underside of the seat.
3
2
.
M5x12
3.5 Nm (2.58 lbf ft)
1
.
M5x17
3.5 Nm (2.58 lbf ft)
A
.
2
.
M5x12
3.5 Nm (2.58 lbf ft)
2
.
M5x17
3.5 Nm (2.58 lbf ft)
.
1
.