Checking The Free Travel Of Foot Brake Lever; Adjusting The Basic Position Of The Foot Brake Lever - Husqvarna 701 Supermoto 2023 Owner's Manual

13.7

Checking the free travel of foot brake lever

Warning
Danger of accidents The brake system fails in the event of overheating.
If there is no free travel on the foot brake lever, pressure builds up in the brake system on the rear
brake.
–
Set the free travel on the foot brake lever in accordance with the specification.
13.8

Adjusting the basic position of the foot brake lever

Warning
Danger of accidents The brake system fails in the event of overheating.
If there is no free travel on the foot brake lever, pressure builds up in the brake system on the rear
brake.
–
Set the free travel on the foot brake lever in accordance with the specification.
–
Check the brake linings for lining thickness
Minimum thickness
» If it is less than the minimum thickness:
–
Change the front brake linings.
–
Check the brake linings for damage and cracking.
» If there is damage or cracking:
–
Change the front brake linings.
–
Check that the brake linings are secured.
H00412-10
» If the brake linings are not secured correctly:
–
Secure brake linings, replace with new parts if neces-
sary.
–
Move the foot brake lever back and forth between the end
stop and the contact to the foot brake cylinder piston and
check free travel
Guideline
Free travel at foot brake
lever
Info
You will know that contact has been made with the
402027-10
foot brake cylinder piston when there is increased
resistance when you activate the foot brake lever.
» If the free travel does not meet specifications:
–
Adjust the basic position of the foot brake lever.
( p. 69)
BRAKE SYSTEM 13
A
≥ 1 mm (≥ 0.04 in)
A
A
.
3 ... 5 mm (0.12 ... 0.2 in)
.
69