HBA350i MX, Dell HBA350i Adapter, and Dell HBA350i
MM
Event management for HBA controllers is through iDRAC and OMSS. See the iDRAC and OMSS documentation for more
information .
LED activity
The Dell HBA355i Adapter, Dell HBA355i Front, Dell HBA355e Adapter, Dell HBA350i MX, and Dell HBA350i Adapter controllers
are equipped with status LEDs.
Table 4. LED behavior for drive
LED state
Off
Green
Flashing green
Table 5. LED behavior for HBA355e Adapter
LED state
Off
Green
Amber
20
Features of Dell HBA355i Adapter, Dell HBA355i Front, Dell HBA355e Adapter, Dell HBA350i MX, Dell HBA350i
Adapter, and Dell HBA350i MM
LED status
Indicates one of the following:
● Power is off.
● All the links are disconnected.
● The cable is disconnected.
Drive is connected and functional.
Active when you perform the locate operation.
LED status
None of the external devices are connected.
When enclosures are connected and all the x4 lanes are linked up.
When a device is connected and not all the x4 lanes are linked up.
NOTE:
Tape drives have only x1 lanes and the default LED color will be
Amber when they are connected. This is an expected behavior.