Table of Contents
Advertisement
Step 4.
Squeeze the latch on the cam handle until it releases, open the cam handle fully to release the
controller module from the midplane, and then, using two hands, pull the controller module out of
the chassis.
Step 5.
Set the controller module aside in a safe place, and repeat these steps if you have another
controller module in the chassis.
Moving drives to the new chassis
You need to move the drives from each bay opening in the old chassis to the same bay opening in the new
chassis.
About this task
A video for this task is available at:
• YouTube:
https://www.youtube.com/playlist?list=PLYV5R7hVcs-Atzbq4KHJgYQHkA9FCH0-m
Step 1.
Gently remove the bezel from the front of the system.
.
Chapter 5
Hardware replacement procedures
89
Advertisement
Table of Contents
