Cisco Quad Camera, Precision 60, SpeakerTrack 60, PTZ-12, and PTZ 4K Camera
Contents
Connect PTZ 4K to Codec Pro
•
Connect the video cable (HDMI) between the camera and codec.
Codec: Always use Connector 1 (HDMI input) for the main camera.
Camera: Connect to the HDMI output.
•
Connect the camera control cable (Ethernet) between the camera
control ports on the camera and codec.
Codec: The connector is marked with the camera control symbol.
Camera: Connect to the Ethernet port.
•
Connect the power adapter to the camera and connect to power.
•
Connect other codec cables as described in
Codec Pro PTZ 4K installation
guide.
HDMI
D15296.12 Cisco Quad Camera, Precision 60, SpeakerTrack 60, PTZ-12, and PTZ 4K Camera JULY 2021.
Introduction
Physical interface
theCisco Webex
RJ45
Connecting to a codec
Connecting to a codec
Power
(100-240 V
, 50/60 Hz)
AC
30
Factory reset
Power
adapter
Always use the provided power cable
and adapter.
Copyright © 2021 Cisco Systems, Inc. All rights reserved.
Camera guide
Appendix