Cisco PTZ 4K Camera Camera Manual page 26

Cisco Quad Camera, Precision 60, SpeakerTrack 60, PTZ-12, and PTZ 4K Camera
Contents
Connect PTZ-12 to Codec Plus
• Connect the video cable (HDMI) between the camera and codec.
Codec: Always use Connector 1 (HDMI input) for the main camera.
Camera: Connect to the HDMI output.
• Connect the camera control cable (Ethernet) between the camera
control ports on the camera and codec.
Codec: The connector is marked with the camera control symbol.
Camera: Connect to the Ethernet port.
• Connect the power adapter to the camera and connect to power.
• Connect other codec cables as described in
Room Kit Plus PTZ-12 installation guide.
RJ45
D15296.12 Cisco Quad Camera, Precision 60, SpeakerTrack 60, PTZ-12, and PTZ 4K Camera JULY 2021.
Introduction Physical interface
theCisco Webex
HDMI
Connecting to a codec Connecting to a codec
Power
(100-240 V , 50/60 Hz)
AC
26
Factory reset
Power
adapter
Always use the provided power cable
and adapter.
Copyright © 2021 Cisco Systems, Inc. All rights reserved.
Camera guide
Appendix