Cisco Quad Camera, Precision 60, SpeakerTrack 60, PTZ-12, and PTZ 4K Camera
Contents
Connect SpeakerTrack 60 to Codec Plus
•
Connect the video cables (HDMI).
Left camera: Connect between Connector 1 (HDMI input) on the
codec to the HDMI input of the left camera.
Right camera: Connect between Connector 2 (HDMI input) on the
codec to the HDMI input of the right camera.
•
Connect the camera control cable (Ethernet) between the camera
control ports on the camera and codec.
Codec: The connector is marked with the camera control symbol.
Camera: Connect to the Ethernet port.
•
Connect the power adapter to the SpeakerTrack 60 connector
panel and connect to power.
•
Connect other codec cables as described in
TelePresence SpeakerTrack 60 installation
RJ45
D15296.12 Cisco Quad Camera, Precision 60, SpeakerTrack 60, PTZ-12, and PTZ 4K Camera JULY 2021.
Introduction
Physical interface
theCisco
guide.
HDMI 1 and HDMI 2
Power
(100-240 V
, 50/60 Hz)
AC
Connecting to a codec
Connecting to a codec
Right
Power
adapter
Always use the provided power cable
and adapter.
21
Factory reset
Appendix
Left
Copyright © 2021 Cisco Systems, Inc. All rights reserved.
Camera guide