Power System Won't Start; Checking The Procedure - Honda CLARITY Plug-In Hybrid 2020 Owner's Manual

Power System Won't Start

Checking the Procedure

When the READY indicator does not come on and the Ready To Drive message
does not appear on the driver information interface, check the following items and
take appropriate action.
Checklist
Check if the related The Remove Charger Connector message appears
indicator or driver
information interface
The Low Battery Charge. Power Reduced. message appears Charge the High Voltage battery.
messages come on.
The Temperature Is Too Cold For Vehicle To Operate
message appears.
The To Start, Hold Remote Near Start Button message
appears.
uMake sure the smart entry remote is in its operating range.
2 POWER Button Operating Range P. 158
The POWER SYSTEM indicator comes on.
The transmission system indicator blinks and Transmission
Problem Apply Parking Brake When Parked message
appears.
Check the brightness The interior lights are dim or do not come on at all.
of the interior lights.
The interior lights come on normally.
Condition
Continued
1Checking the Procedure
If you must start the vehicle immediately, use an
assisting vehicle or booster battery to jump start it.
2 Jump Starting P. 543
What to Do
Removing a charge connector. Set the power
mode to ACCESSORY, then to ON.
2 Charging P. 458
2 Driver Information Interface Warning and
Information Messages P. 103
2 If the Smart Entry Remote Battery is Weak
P. 541
Have your vehicle checked by an authorized
Honda Clarity Plug-In Hybrid dealer.
The power system can be activated as a
temporary measure.
2 If the Transmission System Indicator Blinks
along with the Warning Message P. 556
Have the 12-volt battery checked by an
authorized Honda Clarity Plug-In Hybrid dealer.
Check all fuses, or have your vehicle checked by
an authorized Honda Clarity Plug-In Hybrid
dealer.
2 Inspecting and Changing Fuses P. 564
539