Advertisement
SIMPLE TROUBLE SHOOTING GUIDE
Trouble
4. Band Saw
is broken.
5. Band saw
stuck that
can't easy to
rotation.
Cause
a. Select wrong saw blade.
d. Tongs is seriously damaged and
no fix it.
c. Cutting speed is too fast.
.
d. The cutting direction of band saw
is contrary.
e. Tightness of band saw holder no
follows those properties.
a. The axle of upper and lower
wheel is dust accumulation or get
rusty.
a. The material quality and thickness to
be cut relates to the number of saw
teeth, so number of teeth must be
classified. Please inquire or contact our
service staff to know the correct saw
blade and the number of teeth.
d. When tongs are worn and rock,
workpiece will girp saw blade while saw
is cutting workpiece and hence breaking
is
incurred. Tongs must be replaced.
e. Well adjust the proper cutting speed.
i. Please install the band saw as per the
indicated arrow.
j. Make sure to actually tighten of band
saw.
a. Please take out the axle, clean the rusty
and add oil to lubricating or replace
new axle.
17
Action
Advertisement
