Yamaha XMAX Owner's Manual page 26

Instrument and control functions
 "L/100 km" is the amount of fuel
necessary to travel 100 km under
current riding conditions.
 "MPG" is the distance that can be
traveled on 1.0 Imp.gal of fuel un-
der current riding conditions.
To switch between "km/L" and "L/100
km", push the "INFO" button.
TIP
3
If traveling at speeds under 10 km/h
(6.0 mi/h), "_ _._" is displayed.
Average speed display
ZAUM1112
This display shows the average speed
since it was last reset. The average
speed is calculated as the total dis-
tance traveled divided by the total time
the key has been in the "ON" position
since the last set to zero.
For the UK: "MPH" will be displayed
when the multi-function meter unit has
been set to miles.
To reset the average speed display,
select it by pushing the "INFO" button,
and then push the "INFO" button for 3
seconds.
Warning message function
When a vehicle irregularity, road or ser-
vice condition has been detected, in
addition to any corresponding warning
lights or indicators, the following warn-
ing messages will display accordingly.
 L FUEL (low fuel)
 H TEMP (high coolant tempera-
ture)
 L BATT (low battery voltage)
 H BATT (high battery voltage)
 ICE (possible icy road conditions)
 OIL SERV (oil service required)
 V-BELT SERV (V-belt service re-
quired)
Coolant temperature meter
This meter indicates the temperature
of the coolant, and thereby the engine.
The coolant temperature varies with
changes in the weather and engine
load. If the "H" segment and the cool-
ant temperature warning indicator start
flashing, stop the vehicle and let the
engine cool.
ZAUM1115
1. Coolant temperature meter
NOTICE
Do not continue to operate the en-
gine if it is overheating.
3-12
1
ECA10022