Yamaha XMAX Owner's Manual page 21

The tachometer allows you to monitor
the engine speed and keep it within the
ideal power range.
NOTICE
Do not operate the engine in the ta-
chometer high-rpm zone.
High-rpm zone: 10000 r/min and
above
Fuel meter
SELECT
6 7
5 8
9
4
1000 r/min
10
3
11
2
12
1
0 km/h
E
F
1 2
ZAUM1102
1. Fuel meter
2. Fuel level warning indicator "
3. Fuel reserve tripmeter
With the key in the "ON" position, the
fuel meter indicates the amount of fuel
in the fuel tank. The display segments
of the fuel meter start from "F" (full) and
disappear towards "E" (empty) as the
fuel level decreases. When the fuel lev-
el is low, the fuel pictogram " " and
the last segment will flash. Refuel as
soon as possible.
TIP
The fuel meter is equipped with a self-
diagnosis system. If a problem is de-
tected in the fuel tank electrical circuit,
all segments of the fuel meter will flash
repeatedly. If this occurs, have a
Yamaha dealer check the vehicle.
Instrument and control functions
ECAM1150
RESET
3
"
Clock
To set the clock:
1. Push the "SELECT" button for 3
seconds, and the hour digits will
start flashing.
2. Use the "SELECT" button to set
the hours.
3. Push the "SELECT" button for 3
seconds, and the minute digits will
start flashing.
4. Use the "SELECT" button to set
the minutes.
5. Push the "SELECT" button for 3
seconds to complete setting the
clock.
Odometer and tripmeter display
2
1
TRIP
INFO
ZAUM1104
1. "TRIP/INFO" switch
2. Function display
The odometer and tripmeter display is
equipped with the following:
 an odometer (which shows the to-
tal distance the vehicle has trav-
eled)
 a tripmeter (which shows the dis-
tance traveled since last set to ze-
ro)
 a time tripmeter (which shows the
elapsed riding time since last set
to zero)
3-7
3