Installation Instructions
Installation of the Hob
The appliance is supplied with an installation kit including adhesive sealing material, fixing brackets and
screws.
•
Cut the aperture dimensions as indicated in the figure. Locate the aperture on the worktop so
that, after the hob is installed, the following requirements are followed.
•
Apply the supplied one-sided self- adhesive sealing tape all the way around the lower edge of
the cooktop. Do not stretch the tape.
•
Screw the 4 worktop mounting brackets on to the side walls of the appliance.
•
Insert the appliance into the aperture.
B (mm)
590
min. A (mm)
T (mm)
520
min. C (mm)
H (mm)
41-47.5 min. E (mm)
C1 (mm)
560
min. F (mm)
C2 (mm)
490
G (mm)
D (mm)
50
I (mm)
J (mm)
5
6
50
50
500
10
20
25