Step 4: Hooking Up The Receiver - Sony AVD-S10 Operating Instructions Manual

Step 4: Hooking Up the Receiver

Note
Refer to the instructions supplied with the components to be connected.
Connecting the VCR to the receiver
Connect the SCART (EURO AV) cord (not supplied) to the t EURO AV INPUT (FROM
VIDEO) jack. Be sure to make the connections firmly to avoid hum and noise.
Super Audio CD/DVD receiver
AM
COAXIAL
OUT
FM
75Ω
ANT
Notes
• Do not connect the receiver to a VCR. If you pass the receiver signals via the VCR, you may not receive a clear
image on the TV screen.
• If you cannot view the pictures from a VCR through this receiver which is connected to a TV with RGB
component jacks, set
the signal from the VCR.
• If you want to use your VCR's SmartLink function, connect the VCR to your TV's SmartLink jack.
• The SmartLink function may not work properly if your VCR is connected to your TV via the SCART (EURO
AV) jacks on the receiver.
• When you connect the receiver to your TV via the SCART (EURO AV) jacks, the TV's input source is set to the
receiver automatically when you start playback or press any button except for POWER on the receiver or [/1 on
the remote. In this case, press TV/VIDEO on the remote to return the input to the TV.
• The receiver does not output the S video signal.
• When you select "DVD" by pressing FUNCTION (page 60), the video signal and RGB signal do not output
from the t EURO AV INPUT (FROM VIDEO) jack. Also, the receiver cannot output the S video signal.
• When you select "VIDEO" by pressing FUNCTION (page 60), the audio signal from the t EURO AV INPUT
(FROM VIDEO) jack is output to the connected speakers. The audio signal does not output from theT EURO
AV OUTPUT (TO TV) jack.
When you play a disc recorded in the NTSC colour system, the receiver outputs the video signal or the Setup
Display etc. in the NTSC colour system and the picture may not appear on the PAL colour system televisions.
In this case, open the tray and remove the disc.
GB
22
EURO AV
OPTICAL OPTICAL
L
1 2
(CD ONLY)
IN
R
ANALOG DIGITAL OUT DIGITAL IN
SCART (EURO AV) cord
(not supplied)
to t (Audio/Video) on your TV. When you select
SPEAKERS
IMPEDANCE USE 6–16Ω
FRONT CENTER SURROUND
R L R
+ + +
AUDIO
OUT
– – –
R L R
SUB
WOOFER
To t EURO AV INPUT (FROM VIDEO) jack
L
+
–
L
To SCART (EURO AV)
(RGB), the TV cannot receive