Page 1
EMax34i-XE EMax34s-XE EMax38i-XE EMax42i-XE Australia New Zealand...
Page 2
ENGLISH (Original instructions) Intended use Fitting the lower handle (fig. E) Insert the ends of the lower handle (5) into the corre- Your Black & Decker mower has been designed for mowing sponding holes in the mower. grass. This tool is intended for consumer use only. Press the handle down as far as it will go.
Page 3
(Original instructions) ENGLISH Move the lever towards the rear of the appliance to lower Switch the appliance on as described above. the height of cut. Proceed as shown in fig. P1 Move the lever towards the front of the appliance to raise Move from position 1 to position 2. the height of cut.
Page 4
Technical data Cable storage (fig. O) The cable holders (6) provide a safe and convenient way to EMax34s-XE EMax38i-XE EMax42i-XE store the cable (31) when not in use. EMax34i-XE Type 3 Type 3 Wrap the cable around the cable holders (6) in a figure of Type 3 eight pattern. Voltage Carrying the mower...