Use Auto Detection For An Ipv6 Internet Connection - NETGEAR SXK30 User Manual

Orbi Pro WiFi 6 Mini Router SXR30 and Orbi Pro WiFi 6 Mini Satellite SXS30
Your Internet service provider (ISP) can provide this information. For more
information about IPv6 Internet connection, see the following sections:
• Use auto detection for an IPv6 Internet connection on page 35
• Use auto configuration for an IPv6 Internet connection on page 36
• Set up an IPv6 6to4 tunnel Internet connection on page 38
• Set up an IPv6 6rd tunnel Internet connection on page 40
• Set up an IPv6 pass-through Internet connection on page 42
• Set up an IPv6 fixed Internet connection on page 42
• Set up an IPv6 DHCP Internet connection on page 44
• Set up an IPv6 PPPoE Internet connection on page 46
6. Click the Apply button.
Your settings are saved.

Use auto detection for an IPv6 Internet connection

To set up an IPv6 Internet connection through auto detection:
1. Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.com.
A login window displays.
If your browser does not display a login window but displays a security warning and
does not let you proceed, see Resolve a browser security warning on page 27.
3. Enter the admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Advanced Setup > IPv6.
The IPv6 page displays.
5. From the Internet Connection Type menu, select Auto Detect.
The page adjusts.
Specify Your Internet Settings 35 User Manual