Battery Replacement - Honeywell POWER PRESENTER PLUS 64/128 Instruction Manual

Changing the Battery in the Remote
1) There are two "alignment dots" on the back of the remote case and one "alignment dot" on the
battery cover. Insert a quarter into the slot on the battery cover and turn counter clockwise until
the dot on the battery cover is lined up with the LEFT dot on the remote case. The battery cover
will release.
2) Pull the battery out of the holder. Dispose of the battery in an environmentally proper manner.
3) Insert the new battery with the positive side facing you. The 3.0 volt lithium battery number is
CR2032.
4) Make sure that the "alignment dot" on the battery cover is lined up with the LEFT "alignment
dot" on the remote case as you replace the battery cover. Then turn clockwise until the dot on
the battery cover is lined up with the RIGHT dot on the remote case.
It is recommended that you always carry a spare battery. It is recommended that you always carry a spare battery.
It is recommended that you always carry a spare battery. It is recommended that you always carry a spare battery.

Battery Replacement

Battery Replacement Battery Replacement Battery Replacement