Table of Contents
Advertisement
Commissioning (continued)
Grouping
Purpose:
To each defined group, selected lights are assigned.
How to:
• The "Lights" tab should be highlighted. Tap "+" and select "Lights" to start discovering all the luminaires that are in
close reach for commissioning.
• Please wait for about 10 seconds and when a flashlight (or a torchlight) shows up on a screen, lights have been
detected but not added to the group yet.
From all discovered lights, there are two ways to add lights in a group:
- Through point and trigger approach using a flashlight/torchlight
- Through the received signal strength (RSSI), also known as list based approach
Remarks:
• Bluetooth on your smartphone needs to be activated. In the event Bluetooth is disabled, MasterConnect app will
prompt for activation, which the user needs to confirm.
• The luminaires should be powered up.
• The term "lights" refers to a luminaire with built in wireless sensor or wireless driver.
• Lights that are added in a group are considered claimed devices and therefore, not available for other groups,
projects, or users anymore.
• The maximum number of lights in a group should not exceed 40 for SNS210 MC, 120 for SNS211 MC & SNH211 MC.
PLt-20022UM - EasySense MasterConnect User Manual 09/22 page 7 of 43
Advertisement
Table of Contents
