Table of Contents
Advertisement
Configuration (continued)
Summary of Configuration Parameters
Available in MasterConnect App
Parameter Name
Field task level
Eco-on level
Background light level
Daylight based control
Occupancy based
control
Occupancy mode
Group/Zone occupancy
sharing
Zone occupancy
sharing
Group/Zone light
behavior
Hold time
Grace fading
Prolong time
Infinite prolong time
Color temperature
PLt-20022UM - EasySense MasterConnect User Manual 09/22 page 35 of 43
Default value
100%
1% – 100%
100%
1% – Task Level
20%
1 – Eco on Level
Enabled
Enabled/Disabled
Enabled
Enabled/Disabled
Auto on/Auto off
Auto on/off;
Manual on/off;
Manual on/Auto off
Enabled
Enabled/Disabled
Disabled
Enabled/Disabled
Background light
Background light
level
level / Eco on level
10 minutes
2 – 100 min
10 seconds
1 - 25 seconds
10 minutes
2 - 100 minutes
Disabled
Enabled/Disabled
4000K
Read from driver
Range
Maximum trim level of power level of the luminaire.
A configurable switch-on light level. This parameter
enables energy-savings and its value should be a
percentage level between the field task level and
background light level.
The lowest dim level and used when space is not
occupied.
Turn daylight control on or off.
To enable/disable occupancy detection
Different modes to maximize lighting control
behavior with use of wireless switches.
A configurable feature to allow SNS210 to share its
local occupancy detection status with other SNS210
nodes in the group. As long as presence is detected
within the group, the luminaires stay on at the
Background light level/Eco-on level (configurable
up to Field task level) in non-occupied areas.
If enabled, occupancy sharing is over the Zone. If
Disabled, occupancy sharing is over the Group.
Light behavior of lights that are triggered by other
light that detects occupancy.
The time period from the point at which the last
movement has been detected (e.g. when last
occupant left the room).
The dimming transition time from the Eco-on
level to the Background light level.
The time for which lights remain at the background
level before turning off. Time can be configured
from 2 - 100 minutes.
When enabled, lights continue to stay on back-
ground level and do not switch off.
The white tone of tunable white lights.
Description
Advertisement
Table of Contents
