Factory Default; Save And Exit - HIKVISION TURBO HD D8T PIR Series User Manual

Figure 3-6 FUNCTIONS
 SOLID
Select the ALARM MODE as SOLID. In this way, the
white light source turns on, when the PIR module
received the alarm signal.
 FLASHING
Select the ALARM MODE as FLASHING. In this way, the
white light source flashes when the PIR module
received the alarm signal.
Note:
When the WHITE LIGHT is selected as AUTO, you can
only select the ALARM MODE as FLASHING.
TIME SETTINGS
In the TIME SETTINGS you can set the time as 5 s, 10 s,
15 s, 30 s, or 60 s, which means that the solid mode
stays for the set time when the camera received one
alarm signal.
Note:
The solid mode will be stayed for another set time
when second alarm signal is received, and the rest can
be done in the same way.
PIR LEVEL
Adjust the sensitivity of the PIR module, and the higher
the value is, the more sensitive the PIR module is.
PIR DET MODE
OUTDOOR and INDOOR are selectable for PIR DET
MODE switch.
MOTION DET
You can turn on/off the MOTION DET to meet different
circumstances.
PRIVACY
You can turn on/off the PRIVACY to meet different
circumstances.

3.6 FACTORY DEFAULT

Reset all the settings to the factory default.
3.7 EXIT
Move the cursor to EXIT and click Iris+ to exit the menu.
3.8 SAVE & EXIT
Move the cursor to SAVE & EXIT and click Iris+ to save
the settings, and exit the menu.
UD12338B-A