Preparation Before Washing; Parts Identification - Baumatic BTLW10 Owner's Manual

Preparation before washing

Adjust the feet to level the machine
1
Adjustable foot (extend when
turning clockwise and shorten
when turning anti clockwise )
(Slightly tilt the machine. Adjust the foot knob
to ensure four corners of the machine are steadily
contacted with the ground. If the ground is
obviously not flat, correction should be made on
the ground surface, otherwise the washer barrel
will incline and knock the cabinet)
Connect to the
3
5
power source.
Upper drain
Open the
4 Note:
The water
water tap.
will overflow
when the height
of the drain hose
is under 750mm
the flow will decrease
when over 1200mm.
Before washing, please do take out coins,
NOTICE
keys and other hard objects, and close
！ the zip to prevent clothes and
barrel from damage.
Install the water
2
inlet hose.
one inlet hose
two inlet hoses
Fix the drain Put in
6
hose. clothes
and
suitable
amount of
washing
powder.
7

Parts identification

Upper drain hose
(for upper drain only)
Control panel
Lid
Wash Spin barrel
Agitator
Cabinet
Notice: If the power line damaged, please call maintenance or serviceman of other similar dept. to
change.
Accessories
Inlet hose
Water inlet valve
Power cord
Washing powder box
Handle
Adjustable foot knob
Upper drain hose
8