Download Print this page
WaterLogic 12-WL200CT Manual
WaterLogic 12-WL200CT Manual

WaterLogic 12-WL200CT Manual

Water treatment system
Hide thumbs Also See for 12-WL200CT:

Advertisement

Quick Links

Read and follow all safety information carefully. The signal words used in this manual are selected as
shown below and based on an assessment of the degree of potential injury or damage (severe or
minor) and the occurrence of injury (definitely occurs or has the potential to occur) when the
warning is ignored:
DANGER!
Indicates a situation which, when not avoided, results in death or severe injury.
WARNING!
Indicates a situation which, when not avoided, has the potential to result in death or severe
injury; and/or severe property damage.
CAUTION!
Indicates a situation which, when not avoided, results or has the potential to result in minor
injury; and/or minor property damage.
Basic safety precautions should be followed, including the following:
Ensure all Local, State, and Federal Laws and Codes including health and safety guidelines are met
when installing Waterlogic Equipment. Only qualified service technicians should attempt
installation and service of Waterlogic Equipment. Always read the entire operating instructions
before using the appliance and save these instructions for future use.
DANGER!
This product can cause death or severe injury if incorrectly operated, installed or
maintained. The installation, maintenance, sanitizing and any repair must be performed by
qualified persons trained by Waterlogic International or their approved distributors only. Do not
remove any panel or cover to protect against electrical shock and exposure to UV radiation.
DANGER!
ELECTRICAL SHOCK HAZARD. Always use a dedicated and properly grounded outlet.
Unit should be protected by ground-fault circuit interrupter (GFCI) or residual current device (RCD)
having a rated residual operating current not exceeding 30mA. Use only Waterlogic supplied
power cord. Never use extension cords or power strips to connect unit. Do not use if the power
supply cord is damaged. Always unplug from power supply prior to servicing.
WARNING!
AUTHORIZED USE ONLY. This appliance is to be used for its intended purpose as
described in this manual and untrained individuals who use this manual assume the risk of any
resulting property damage or personal injury. This appliance can't be used by children and persons
with reduced physical, sensory or mental capabilities or lack of experience.
WARNING!
DO NOT OPERATE IF DAMAGED. Unplug and isolate water supply if abnormal
conditions exist. Contact Waterlogic or authorized dealer for repair, service, and installation to
avoid hazards.
WL200 Manual
SAFETY ALERT SYMBOLS
SAFETY PRECAUTIONS
Page 4 - Revision: 10-21-21

Advertisement

loading

Summary of Contents for WaterLogic 12-WL200CT

  • Page 1 The installation, maintenance, sanitizing and any repair must be performed by qualified persons trained by Waterlogic International or their approved distributors only. Do not remove any panel or cover to protect against electrical shock and exposure to UV radiation.
  • Page 2 CAUTION! USE A WATER PRESSURE REGULATOR. Waterlogic will not be responsible for injury or damage caused by excessive water pressure. Input or feed pressure must be 40 psi to 60 psi. Be aware of any potential pressure surges caused by building/municipal pumping stations.
  • Page 3 WL200 FEATURES AND BENEFITS Cold Water Waterlogic WL200 Water Treatment System comes standard with Cold Water Selection. High Volume Storage and Water Capacity Tower Model has 4 liters of Cold Water Capacity. Counter Top has 2 liters of Cold Water Capacity.
  • Page 4 Standard for Drinking Water Coolers. CSA C22.2 No. 120 CSA Standard for Refrigeration. BPA Free - Waterlogic tests for BPA and declares that all of its products are Bisphenol-A FREE and contain no harmful BPA plastics. Waterlogic is certified to ISO 9001:2015 – Quality Management Systems (certified by Intertek).
  • Page 5: Specifications

    MODEL/PART DESIGNATIONS MODEL - BRAND NAME DESCRIPTION PART NUMBER Waterlogic WL200 Counter Top - Cold Water WL200 Counter Top F-6002-M-C-TT-CS-WLU 12-WL200CT Serial Number Prefix: 50 or HJ2C116CS Waterlogic WL200 Tower - Cold Water WL200 Tower F-6002-FS-C-TT-CS-WLU 12-WL200FS Serial Number Prefix: 29 or HJ1C116CS...
  • Page 6: Shipping Specifications

    SHIPPING SPECIFICATIONS ITEM WL200 Counter Top WL200 Tower 13.5” x 14.5” x 17.75” (34cm x 37cm x 13.5” x 14.5 x 40.5” (34cm x 41cm x Width/Depth/Height 45cm) 103cm) Weight (dry) 42 pounds (19.5 kg) 58 pounds (26.5 kg) ELECTRICAL SPECIFICATIONS ELECTRICAL SUPPLY 120V/60Hz, 1PH 15 Amp Service...
  • Page 7 OPERATING INSTRUCTIONS Dispensing Button The above picture shows front LCD display and control panel for the Waterlogic WL200 Water Treatment System. For Cold Water: Press the Dispensing Button. WL200 Manual Page 10 - Revision: 10-21-21...
  • Page 8 Waterlogic will, at its sole discretion, determine whether to correct the defect or replace the unit, free of charge to you. If Waterlogic determines that the unit should be returned for warranty service, Waterlogic will approve of return in writing and will issue a Return Authorization which you must obtain prior to shipping the product.

This manual is also suitable for:

Wl20012-wl200fs