HP ProBook 4435s Maintenance And Service Manual page 92

Hide thumbs Also See for ProBook 4435s:
Table of Contents

Advertisement

4.
From the optical drive connector (2), disconnect the optical drive cable (3).
5.
Lift the system board up at an angle (4) to gain access to the cables underneath.
6.
On the bottom of the system board, disconnect the battery connector cable (1) from the system
board.
7.
Disconnect the smaller power cable (2) and the larger power cable (3) from the system board.
8.
Lift the system board out of the computer (4).
Reverse this procedure to install the system board.
84
Chapter 4 Removal and replacement procedures

Advertisement

Table of Contents
loading

This manual is also suitable for:

Probook 4436s

Table of Contents