System Board - HP ProBook 4435s Maintenance And Service Manual
Hide thumbs
Also See for ProBook 4435s:
- User manual (108 pages) ,
- Reference manual (96 pages) ,
- Getting started (70 pages)
Table of Contents
Advertisement
4.
Lift the board straight up out of the computer (3)
Reverse this procedure to install the USB board.
System board
NOTE:
All system board spare part kits include replacement thermal material.
Description
System board for use UMA models
System board for use in discrete models with 512-MB graphics memory
System board for use in discrete models with 1-GB graphics memory
Before removing the system board, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet,
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
5.
Remove the following components:
a.
Bottom door (see
b.
Hard drive (see
82
Chapter 4 Removal and replacement procedures
Battery on page
40).
Bottom door on page
Hard drive on page
44)
41).
Spare part number
654488-001
646327-001
654490-001
Advertisement
Table of Contents
