HP ProBook 4435s Maintenance And Service Manual page 100

Hide thumbs Also See for ProBook 4435s:
Table of Contents

Advertisement

7.
If you need to remove the hinge covers from the display hinges, pull the hinges straight up and
off the display to remove them.
Display hinge covers are available using spare part number 646355-001.
8.
To replace the display bezel, remove the two rubber screw covers (1) and the two Phillips
PM2.5×5.0 screws (2) in the bottom corners of the display bezel.
9.
Flex the top (3) of the bezel, the inside edges of the left and right sides (4), and then the bottom
(5) of the bezel until it disengages from the display enclosure.
10.
Remove the display bezel.
92
Chapter 4 Removal and replacement procedures

Advertisement

Table of Contents
loading

This manual is also suitable for:

Probook 4436s

Table of Contents