Honeywell Prestige 2.0 THX9421 Manual page 46

Table of Contents

Advertisement

®
THX9321 PRESTIGE
2.0 AND THX9421 PRESTIGE
ISU
Installer Setup
Number
Name
4140
Residential:
Entry / Exit Remote -
Vacation Heat
Setpoint
Commercial:
Entry / Exit Remote -
Holiday Heat
Setpoint
5000
What Sensors are
WIRED to your
System?
5010
Indoor Temperature
Sensor Name
5020
What Terminals are
Wired to the Indoor
Temperature Sensor?
68-0311—07
®
Table 4. Installer Setup (ISU) Table. (Continued)
Settings
None
40° F to 90° F
Note: setpoint is limited based on
setting at ISU 4100.
Check box on screen for each:
Indoor Air Temperature
Outdoor Air Temperature
Return Air Temperature
Discharge Air Temperature
[Sensor Name]
None
S1
S2
S3
S4
IAQ WITH EIM
Residential,
Commercial
Default
or Both
60° F
Both
None
Both
Indoor Sensor
Both
None
Both
46
Requires
EIM
Notes
No
The thermostat maintains this Heat setting
when the user presses Vacation / Holiday at the
Entry / Exit Remote. Select None to delete this
temperature setting. The thermostat only
responds to the Entry / Exit Remote if a
temperature is pre-set at this screen. See
"Wireless Entry/Exit Remote" beginning on
page 130.
Yes
Wired Sensors requires an EIM (Equipment
Interface Module). This ISU is only displayed if
one of the S1-S4 terminals is available.
Click boxes on screen to select which sensors
are wired to the S1-S4 terminals at the EIM.
The thermostat will not display the Outdoor Air
Temperature option at ISU 5000 if a wireless
outdoor air sensor is connected.
The thermostat will not display the Indoor Air
Temperature option at ISU 5000 if 6 wireless
indoor air sensors are connected. If you have a
wired Indoor Air Temperature network (1, 4, 9
etc), the thermostat will allow up to 5 wireless
indoor air sensors.
The thermostat will not display the Return /
Discharge Air Temperature option at ISU 5000
if there is no fan in the system.
Yes
Wired Sensors requires an EIM (Equipment
Interface Module).
Enter a name (location) of the Wired Indoor Air
Temperature Sensor.
Yes
Wired Sensors requires an EIM (Equipment
Interface Module).

Advertisement

Table of Contents
loading

This manual is also suitable for:

Prestige iaq with eim thx932

Table of Contents