Enable Or Disable Implicit Beamforming - NETGEAR Orbi Pro SRR60 User Manual

3. Enter the admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Advanced Setup > Wireless Settings.
The Advanced Wireless Settings page displays.
5. In the Backhaul Password section, click the GENERATE button.
The router generates a new backhaul password.

Enable or Disable Implicit Beamforming

Implicit beamforming means that the router can use information from client devices
that support beamforming to improve the WiFi signal.
To enable or disable implicit beamforming:
1. Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.com.
A login window opens.
3. Enter the admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Advanced Setup > Wireless Settings.
The Advanced Wireless Settings page displays.
5. To enable Implicit beamforming, select the Enable Implicit BEAMFORMING check
box.
6. To disable Implicit beamforming, clear the Enable Implicit BEAMFORMING check
box.
7. Click the Apply button.
Your settings are saved.
If you connected over WiFi to the network, you are disconnected from the network
and must reconnect.
Specify Network Settings
Orbi Pro
83 User Manual