Setting Parameters; Pulse Timer Function Block (Tp) - ABB REL 501-C1 2.5 Technical Reference Manual

6.6.1
6.7
Configurable logic blocks (CL1)
TL01-
TIMERLONG
INPUT OFF
T ON
xx00000162.vsd
Table 43: Input signals for the TIMERLONG (TLnn-) function block
Signal
INPUT
T
Path in local HMI: ServiceReport/Functions/TimerLong
Table 44: Output signals for the TIMERLONG (TLnn-) function block
Signal
OFF
ON

Setting parameters

Table 45: Setting parameters for the TimerLong (TLnn-) function
Parameter Range
T 0.0-90000.0
Step:0.1

Pulse timer function block (TP)

The pulse function can be used, for example, for pulse extensions or limiting of operation of out-
puts. The pulse timer TP has a settable length.
TP01-
PULSE
INPUT OUT
T
xx00000163.vsd
Table 46: Input signals for the TP (TPnn-) function block
Signal
INPUT
T
Path in local HMI: ServiceReport/Functions/Pulsen
Description
Input to long timer
Time value. See setting parameters
Description
Output from long timer, drop-out delayed
Output from long timer, pick-up delayed
Default Unit Description
0.0 s Delay for TLnn function. Can only be set
from CAP configuration tool.
Description
Input to pulse timer
Pulse length. See setting parameters
Chapter 3
Common functions
47