Table of Contents
Advertisement
1
1.1
1.2
16
Terminal identification rated and base values
Terminal identification rated and base values
General terminal parameters
Use the terminal identifiers to name the individual terminal for identification purposes. Use the
terminal reports to check serial numbers of the terminal and installed modules and to check the
firmware version.
Identifiers and reports are accessible by using the HMI as well as by SMS or SCS systems.
Path in local HMI: Configurations/Identifiers
Table 4:
Set parameters for the general terminal parameters function
Parameter
Range
Station Name
0-16
Station No
0-99999
Object Name
0-16
Object No
0-99999
Unit Name
0-16
Unit No
0-99999
Basic protection parameters
Path in local HMI: Configuration/AnalogInputs/General
Table 5:
Setting parameters for Analog Inputs - General
Parameter
Range
CTEarth
In/Out
fr
50, 60, 16 2/3 50
Path in local HMI: Configuration/AnalogInputs/TrafoinpModule
Default
Unit
Description
Station Name
char
Identity name for the station
0
-
Identity number for the station
Object Name
char
Identity name for the protected object
0
-
Identity number for the protected object
Unit Name
char
Identity name for the terminal
0
-
Identity number for the terminal
Default
Unit
Description
Out
-
CT earthing location
In = bus side
Out = line side
Hz
System frequency
Chapter 2
General
Advertisement
Table of Contents
