Honeywell SILENT KNIGHT 6700 Manual page 91

Menu System
Admin Profiles
After initial power-up, the 6700 requires a password change and user account setup before programming. Only Admin1 will be active. Using
the login for Admin1, the default password (0000000) must be changed to a new, unique password. This new password must be 7-digits and
cannot be sequential or easily guessed. If the password is not changed, a default password trouble will appear on the panel.
There is a maximum of two administrator profiles available. After the administrator account is set up, you must create a User account(s).
Only a User account has the ability to program the control panel. There is a maximum of 18 User accounts available.
Admin accounts can:
• View cybersecurity logs with date/time stamp
• Edit name to user profiles
• Enable/disable user profiles
• Modify access codes of user profiles
• Edit access to panel functions
• Change computer access code
• Restore factory default settings to the panel
User (Installer) Profiles
There are two programming levels which will access the Programming screens. From either of the screens, access to specific system and
device features or programming may be obtained. An "Installer" can program local panel data relating to device types, zoning, messages,
control panel functions, etc. A "Multi-site Installer" can program panel data across a network. A user has the ability to change their adminis-
trator-assigned password after it has been assigned for the first time. Refer to Section 6.2.5 on page 58.
• Profile 1 is the profile used that dictates what functions to which the Fire Fighter Key has access. Because this is the profile used for a
key, the User Name and the Access Code cannot be edited.
• Profile 2 is defaulted as "Installer" and profile 3 is defaulted to "Multi-Site Installer". Profiles 4-18 are empty profiles available for
assignment. User profiles 2-18 can be edited for name and panel functions. Table 9.1 lists the panel functions that can be selected for
each user profile.
6700 Manual — P/N LS10148-001SK-E:F 8/29/2022
Type of Function
Panel Operations
Panel Menus
*Function Keys are only available on the 6860 LCD annunciator.
User Profile Selectable Panel Functions
Table 9.1
Selectable Functions
System Reset
System Silence
System Ack
Fire Drill Key
*F1 Function Key
*F2 Function Key
*F3 Function Key
*F4 Function Key
System Tests
Fire Drill Menu
Indicator Test
Walk Test-No Report
Walk Test -With Report
Communicator Test
Clear History Buffer
Point Functions
Disable/Enable Point
Point Status
Set SLC Device Address
SLC Single Device Locater
SLC Multiple Device Locater
I/O Point Control
Event History
Set Time & Date
System Information
Network Diagnostics
Network Programming
Panel Programming
Send/Receive Firmware Update
System Operation
91