AEG DVD 4556 LCD Instruction Manual page 43

Change Audio-Language /
Audio-Mode
Show Subtitles
Stop Playback
Select previous Chapter / Track
Select next Chapter / Track
Selecting track directly
Select a Passage Using the Menu
Repeat DVD-Title / Chapter
Repeat CD-Track
Repeat CD
End Repeat
DVD4556LCD_IM
Press the AUDIO button (Fig. 3/5) repeatedly to change the audio-language.
The available languages are dependent on the DVD.
NOTE:
If the medium does not support this function, (e. g. on a CD), you can change
the audio mode with this button, e.g. set it to "mono" or "stereo".
Press the SUBTITLE button (Fig. 3/20) repeatedly if you want to activate, deacti-
vate or select a different subtitle language. The available subtitle languages are
dependent on the DVD.
■
During playback press " " button (Fig. 3/7). This will stop play.
■
Press the " " button (Fig. 3/7) again to continue the playback from the last
position.
■
Press the " " button (Fig. 3/7) twice to stop reply entirely. If you press the
" " button (Fig. 3/7) again, the CD/DVD will start from the beginning.
■
Press the " " button (Fig. 3/11) to return to the beginning of the current
chapter.
■
Press the " " button (Fig. 3/11) to return to the beginning of the previous
track.
Press the " " button (Fig. 3/11) to forward to the next chapter or track.
Enter the number of the desired chapter/track using the numeric buttons on
your remote control (Fig. 3/22).
Playback of the chapter / track starts after a short while.
For your convenience, you may select respective media passages directly from
you screen menu as follows:
1. Select the desired category by repeatedly pressing the SEARCH button
(Fig. 3/24).
2. Use the navigation buttons (Fig. 3/9) to select the category.
3. Enter the moment in time for playback to start. Depending on the media
type this can be a track number, a chapter or a time. Enter the values with the
numeric buttons (Fig. 3/22). Playback starts after a short moment.
1. Select chapter or title to be repeated.
2. Press the REPEAT button (Fig. 3/16). "Chapter" is displayed.
3. Press the REPEAT button again until "Title" or „All" is displayed.
1. Select the track to be repeated.
2. Press the REPEAT button (Fig. 3/16). "Track" is displayed.
Press the REPEAT button (Fig. 3/16) again until "All" is displayed.
Repeatedly press the REPEAT button (Fig. 3/16), until the message disappears
from the screen.
English
43
16.12.16